ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
JDS546 Original All-Fuel Style Sediment Bowl - must be used with a 3-way valve, this assembly will NOT shut the fuel off
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
JDS641 Sediment Bowl Screen - 1.785" O.D., .500" center hole
|
JDS642 Sediment Bowl Gasket - 2.150 O.D. - USA Made
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks) - USA Made
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
JDS416 Fuel Cap - used on John Deere until approx. 1941-1942
|
JDS1011 Fuel and Oil Line Gland and Nut - 1/2"-24 UNF. FOR 5/16" Line
|
JDS903 Connector For Fuel Lines - 1/8"-27 NPT Pipe , 5/16" Compression Tube Fits 5/16" Tube, Brass
|
ABC4285 Fuel Line Adapter Fitting
|
JDS647 Rubber Grommet - for hole in spark plug cover, fuel tank pads & electric wire grommet
|
JDS660 3-Way Fuel Valve - Fits John Deere A (SN 497590- 697756), [ AO, AR (SN 260000 - 280849) ], B (SN 94494 - 305246), D (SN 148872 - 191777), G (SN 95000 - 59701), H (SN 20650 and up)
|
JDS863 Packing For 3-Way Valve - 0.865" O.D., 0.485" I.D., 0.250" thick, Made out of graphite / graphalon infused (impregnated) cork
|
JDS3378 Throttle Lever Spring - 3.555" overall length, 0.770" O.D., 0.125" wire diameter
|
JDS356 Throttle Spring - 6-1/4" overall length
|
JDS385 Throttle Lever - 0.436" hole dia.
|
JDS908 Upper Foot Throttle Spring - 6-1/4" overall length
|
JDS913 Lower foot Throttle Spring - USA Made
|