ACS172 Radiator or Fuel Cap
|
MHS043GK Fuel/Radiator Cap Gasket (rubberized cork) - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick - USA Made
|
ACS158 Fuel Tank - Steel, all new material, Sealed with Red Kote fuel tank liner, Primed
|
ABC003 Vented Fuel Tank Cap - 2.700" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
ACS344 Choke Rod - 27-1/8" overall length
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
ABC4632 1/4" Fuel Line Adapter Fitting - USA Made
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
ACS2066 Allis Chalmers G Fuel Line - 1/4" O.D., 11" overall length, 1/8" NPT thread, inverted flare nuts
|
ABC4285 Fuel Line Adapter Fitting
|
ACS182 Governor Control Rod Spring - 2-1/2" overall length, 11/16" diameter, 0.062" wire diameter
|
MFS150 Ball Type Governor with Umbrella - fits models listed with 4 cylinder Continental Gas/LP engines & 3 cylinder Perkins gas/LP engines, 1/2" shaft x 2-3/4" long, 5/8" balls, 4" dia.
|
ACS1251 AC G Throttle Lever - USA Made
|
ACS334 Throttle Rod Bracket - USA Made
|
ABC4133 5/16" - 5/8" Worm Drive Hose Clamp -USA Made - Range 5/16" to 5/8", Stainless Steel
|