MHS043GK Fuel/Radiator Cap Gasket - 2-5/8" O.D., 1-1/2" I.D., 1/10" thick
|
MFS2442 Upper Water Outlet Elbow - It is also the front fuel tank mount. It has the provision for the water temperature probe
|
MFS111 Ferguson TE20, TO20, TO30 Fuel Tank - 3" long, 17 1/16" wide, 8-1/16" tall
|
ABC003 Vented Fuel Tank Cap - 2.700" O.D., 1.88" tab to tab overall length, .250" Tab width, Includes gasket
|
CKS117 Fuel or Oil Fill Cap - 2.25" I.D., 1.80" tang to tang length, 2.37" O.D., includes gasket, Like Original!
|
MHS043 Fuel Cap - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC494 Fuel Tank Webbing - 3" long X .042" thick X 1" wide
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
MFS183 Choke Knob - Plastic, 10-32 metal threads
|
ABC038 Fuel Sediment Bowl Assembly - 3/8" Pipe thread inlet, 1/4" Tube outlet
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC3765 Fuel Sediment Bowl Screen - Square hole screen C875 silicone bronze alloy 1 3/4" outside diameter
|
ABC319 5 Pack Fuel Sediment Bowl Screen - Square hole screen, 1 3/4" outside diameter
|
In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
ABC4285 Fuel Line Adapter Fitting - 1/8" NPT male to 1/4" NPT compression for 5/16" fuel line
|
MFS150 Ball Type Governor with Umbrella - fits models listed with 4 cylinder Continental Gas/LP engines & 3 cylinder Perkins gas/LP engines, 1/2" shaft x 2-3/4" long, 5/8" balls, 4" dia.
|
MFS1829 Governor Compensator Spring - Mounts horizontally on engine, 3.386" overall length, .675 O.D., .103" wire thickness
|
FDS258 Hose Clamp - Fits 1-3/4" O.D., To 2" O.D. hoses, 2" I.D.
|
IHS638 Wittek Tower Clamp - fits hoses measuring between 1.815" and 2.000"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS637 Wittek Tower Clamp - fits hoses measuring between 1.687" and 1.780"
|
IHS641 Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625"
|