IHS5755 Governor Throttle Shaft Housing Oil Seal - International Tractors
|
IHS6633 Bearing, ST289 (Governor or IPTO shaft) - International
|
IHS1577 All Fuel Sediment Bowl Assembly - 1/4" pipe (stem that screws into the tank) (2) -5/16" compression outlets
|
IHS713 All-Fuel Sediment Bowl - This sediment bowl is designed for tractors with 2 fuel tanks, 3/8" Pipe inlet. 2 - 5/16" Compression outlets Fuel lines thread directly into the sediment bowl housing
|
IHS3881 Sediment Bowl Assembly - 2.315" long bowl, 0.375" pipe inlet, 5/16" compression outlet, Includes (2) fuel line fittings to fit 0.313" line
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
IHS1487 Farmall H Gas Steel Fuel Line - Fits from fuel strainer to carburetor --- 25" Length
|
JDS642 Sediment Bowl Gasket - 2.150 O.D. - USA Made
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
IHS5662 Fuel Filter Bleeder Valve
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
IHS989 Radiator or Fuel Tank Hold Down Spring - 3/4" O.D., 1.15" long, 0.10" wire diameter
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks) - USA Made
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
IHS577 Auxiliary Fuel Cap - .350" tall, 1.785" inside dia., 1.965" O.D., 1.437" tang to tang length, .352" tang width, includes gasket
|
IHS416 Triple Baffle Fuel Cap - 7/8" O.D., 2-1/2" tall, 2.144" tang to tang length, .400" tang width, 1.840" inside center dia.
|
IHS3414 Vented Fuel Cap - 13" overall length
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
IHS2622 Fuel Line Fitting - 1/4" NPT. Fits 5/16" line
|
IHS941 Fuel Line - For distillate or kerosene tractors (tractors with two tanks), 17" overall length
|