Fuel System Parts
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks)
|
IHS5662 Fuel Filter Bleeder Valve
|
IHS536 Radiator and Fuel Tank Mounting Pad - 1.5" O.D.
|
IHS989 Radiator or Fuel Tank Hold Down Spring - 3/4" O.D., 1.15" long, 0.10" wire diameter
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
IHS5557 Saw Tooth Throttle Body Only
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
IHS3409 Vented Fuel Gauge Cap - 14-3/4" overall length
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
IHS577 Auxiliary Fuel Cap - .350" tall, 1.785" inside dia., 1.965" O.D., 1.437" tang to tang length, .352" tang width, includes gasket
|
IHS416 Triple Baffle Fuel Cap - 7/8" O.D., 2-1/2" tall, 2.144" tang to tang length, .400" tang width, 1.840" inside center dia.
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
IHS1577 All Fuel Sediment Bowl Assembly - 1/4" pipe (stem that screws into the tank) (2) -5/16" compression outlets
|
IHS3881 Sediment Bowl Assembly - 2.315" long bowl, 0.375" pipe inlet, 5/16" compression outlet, Includes (2) fuel line fittings to fit 0.313" line
|
IHS1574 Glass Bowl for Water Trap/Fuel Strainer - 2-7/8" O.D 4' tall
|
IHS713 All-Fuel Sediment Bowl - This sediment bowl is designed for tractors with 2 fuel tanks, 3/8" Pipe inlet. 2 - 5/16" Compression outlets Fuel lines thread directly into the sediment bowl housing
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC1221 Gasket fits AC and Case Fuel Cap, or IH and JD Fuel Strainers - 2.242" I.D., 2.948" O.D., rubberized cork
|
JDS642 Sediment Bowl Gasket - 2.150 O.D.
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
|
|