Fuel System Parts
ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
JDS1983 Sediment Bowl Assembly - Automatic Shut Off, these are made using our USA Viton O-ring
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
JDS641 Sediment Bowl Screen - 1.785" O.D., .500" center hole
|
JDS642 Sediment Bowl Gasket - 2.150 O.D. - USA Made
|
JDS952 Viton Washer - Viton is superior because it withstands the ethanol in modern fuel unlike the OEM design which utilizes rubber
|
JDS950 Fuel Filter Repair Kit - Fits John Deere A, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830 all 2 cylinder - USA Made
|
JDS951 Fuel Filter Diaphragm
|
GP-A4978/4983R Fuel Shut Off Repair Kit
|
JDS6177 Fuel Inlet Strainer, R10159 - Fits John Deere 50, 60, 70, 520, 530, 630, 720, 730
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
JDS512 Fuel Tank Filler Neck Grommet - 2-3/16" I.D. and 3-7/8" O.D. Nitrile butadiene rubber
|
JDS681 Fuel Tank Filler Neck Grommet - 2-1/2" I.D. and 4-1/2" O.D. Nitrile butadiene rubber (NBR).
|
JDS860 Rubber Fuel Tank Pad - 1 1/2" O.D. 1/2" thick 1/2" center hole
|
JDS1712 2 Cylinder Fuel Sending Unit - Works for either 6 volt or 12 volt systems & Positive and Negative ground systems.
|
ABC3256 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.091" thick - USA Made
|
JDS742 Red Rubber Cover - only fits caps with 3.240" O.D.
|
JDS729 Fuel Cap - 4.040" red cover O.D., 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center dia. 1.375" tall
|
MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
JDS903 Connector For Fuel Lines - 1/8"-27 NPT Pipe , 5/16" Compression Tube Fits 5/16" Tube, Brass
|
ABC4285 Fuel Line Adapter Fitting
|
JDS647 Rubber Grommet - for hole in spark plug cover, fuel tank pads & electric wire grommet
|
JDS863 Packing For 3-Way Valve - 0.865" O.D., 0.485" I.D., 0.250" thick, Made out of graphite / graphalon infused (impregnated) cork
|
|
|