MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
JDS865 Air Cleaner To Carb Hose And Or Lower Water Hose - 2-1/16" I.D., 2-1/2" O.D., 4" long
|
JDS1712 2 Cylinder Fuel Sending Unit - Works for either 6 volt or 12 volt systems & Positive and Negative ground systems.
|
JDS647 Rubber Grommet - for hole in spark plug cover, fuel tank pads & electric wire grommet
|
JDS535 Screen With Clip and 2 Springs for Pre-Cleaner - Only fits models listed with 7" dia. Pre-Cleaner Bowl, 5-1/4" Tall, 19-3/8" Long
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC494 Fuel Tank Webbing - 3" long X .042" thick X 1" wide
|
ABC3256 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.091" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS832 Choke Knob/Speed Control Knob - Metal, for gas or diesels, 1/4"-20 thread size
|
JDS742 Red Rubber Cover - only fits caps with 3.240" O.D.
|
ABC3352 Cap Gasket - 1-3/4" outside diameter, 1.100" inside diameter, 0.125" thickness NBR
|
JDS729 Fuel Cap - 4.040" red cover O.D., 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center dia. 1.375" tall
|
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
JDS512 Fuel Tank Filler Neck Grommet - 2-3/16" I.D. and 3-7/8" O.D. Nitrile butadiene rubber
|
JDS681 Fuel Tank Filler Neck Grommet - 2-1/2" I.D. and 4-1/2" O.D. Nitrile butadiene rubber (NBR).
|
JDS1983 Sediment Bowl Assembly - Automatic Shut Off, these are made using our USA Viton O-ring
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC5275 Fuel Filter, Diesel
|
JDS642 Sediment Bowl Gasket - 2.150 O.D.
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
JDS641 Sediment Bowl Screen - 1.785" O.D., .500" center hole
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|