ABC2672 Filler Neck Straightening Tool - Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks)
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
ABC1656 Black Canvas Fuel Tank Webbing - 3' Long X 1.5" Wide X .050 Thick
|
ABC1823 Woven Fuel Tank Webbing - 3' Length X 1" Wide X .050" Thick Mildew Resistant
|
ABC1827 Quality Woven Fuel Tank Webbing - 3' Length X 2" wide X .050" thick
|
ABC3256 Fuel Sending Unit Gasket - 2.850" O.D., 1.715" I.D., 0.091" thick
|
ABC3210 Universal Engine Stop Cable - Nylon sheathed. Length = 96", can be cut to desired length needed
|
ABC423 Universal Choke Cable - Metal sheathed, Length = 72", Solid 0.006" inner wire, Cut to length, Can also be used as a `STOP" cable for diesel engines
|
JDS718 Metal Sheathed Choke Cable - 47" Long
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
JDS416 Fuel Cap - used on John Deere until approx. 1941-1942
|
IHS2642 Rubberized Cork Fuel Cap Gasket - 2.580" O.D., 1.900" I.D., 0.095" thick
|
JDS679 Fuel Tank Filler Neck Grommet - 2-7/16" I.D. and 3-3/4" O.D. Nitrile butadiene rubber (NBR).
|
ABC2426 Choke or Fuel Shut Off Cable Clip - For Marvel Schebler Carburetors
|
ABC092 Gas Fuel Strainer Assembly - 3/8" pipe inlet, 1/8" pipe outlet, includes a 5/16" line compression adaptor fitting, 1.280" bowl length
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC490 In-Line Fuel Filter - Fits models using 3/8" fuel lines
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D.
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
In Line Fuel Shut Off - 1/4 x 1/4 or 3/8 x 3/8 available
|
ABC4285 Fuel Line Adapter Fitting - 1/8" NPT male to 1/4" NPT compression for 5/16" fuel line
|
IHS638 Wittek Tower Clamp - fits hoses measuring between 1.815" and 2.000"
|
IHS639 Wittek Tower Clamp - fits hoses measuring between 1.807" and 2.285"
|
IHS637 Wittek Tower Clamp - fits hoses measuring between 1.687" and 1.780"
|
IHS641 Wittek Tower Clamp - fits hoses measuring between 2.400" and 2.625"
|