MFS5568 Hydraulic Draft Control Seat - Fits 135, 150, 165, 175, 180, 235, 245, 1080, 1085, 255, 265, 275
|
MHSK1 Deck Stabilizer Kit
|
MFS5906 Hydraulic Piston Pump O-Ring Kit
|
MFS5611 Hydraulic Piston Pump Overhaul Kit
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
773126M92 Power Steering Pump - Fits JS Barnes type pump
|
FDS4671 Draft Control Spring
|
MFS3743 Main Hydraulic Pump Assembly - using 10 spline camshaft with 0.098" pistons and horizontal safety relief valve (can replace vertical safety valve), 2500-3000 PSI
|
ABC266 Hydraulic Lift Piston Ring Kit - For applications using 2 1/2" diameter lift piston
|
MFS4356 Hydraulic Lift Piston
|
MFS4359 Hydraulic Lift Piston Ring Kit - Ford 3" Pistons, includes 3 Rings
|
MFS3554 Hydraulic Lift Cover Valve Block Off Plate - 3.775" overall length 2.950" wide (1) 1/8" NPT port
|
MFS3614 Hydraulic Lift Cover Gasket - 0.017" thick
|
MFS3570 Hydraulic Pump Strainer - 4.000" overall length 2.390" O.D. 1.820" I.D., Measure before ordering as there were two (2) different lengths
|
MFS3948 Single Hydraulic Remote Valve With Lever - This valve bolts to the lift cover. Outlets are 1/2" pipe thread
|
MFS3633 Dual Hydraulic Remote Valve Kit
|
MFS3746 Front Hydraulic Pump Adapter Plate (Drive Hub) -with Continental & Perkins gas, LP and diesel engines using 3 bolt front pump drive, adapter plate bolts to the crankshaft pulley
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
ABC302 Eyelet Assembly Kit - includes eyelet assembly, nut and lock washer
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
FDS024 Stabilizer Kit, Category 1
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 Hitch Pin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
FDS211 Drawbar Lock - Category 1 - Keeps 3-Point hitch drawbar from twisting
|
ABC4319 Single Hydraulic Remote Hose, Coupler, and Bracket Kit
|
FDS219 Left Hand Leveling Rod - 19" Center to Center Pin Holes
|