MFS5568 Hydraulic Draft Control Seat - Fits 135, 150, 165, 175, 180, 235, 245, 1080, 1085, 255, 265, 275
|
MHSK1 Deck Stabilizer Kit
|
MFS5894 Hydraulic Pump Drive Shaft
|
MFS5906 Hydraulic Piston Pump O-Ring Kit
|
MFS5611 Hydraulic Piston Pump Overhaul Kit
|
MFS5903 Hydraulic Pump Seal Kit
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
FDS073 Friction Disc - 3" OD, 1/2" CENTER HOLE, 0.210" thick material
|
MFS4670 Hinge Pin (Cat. 1)
|
773126M92 Power Steering Pump - Fits JS Barnes type pump
|
|
1862486M96 Hydraulic Pump Valve Assembly - For models using hydraulic pump w/pressure control valve
|
FDS4671 Draft Control Spring
|
MFS3743 Main Hydraulic Pump Assembly - using 10 spline camshaft with 0.098" pistons and horizontal safety relief valve (can replace vertical safety valve), 2500-3000 PSI
|
MFS4356 Hydraulic Lift Piston
|
MFS4359 Hydraulic Lift Piston Ring Kit - Ford 3" Pistons, includes 3 Rings
|
MFS3554 Hydraulic Lift Cover Valve Block Off Plate - 3.775" overall length 2.950" wide (1) 1/8" NPT port
|
MFS3614 Hydraulic Lift Cover Gasket - 0.017" thick
|
MFS3570 Hydraulic Pump Strainer - 4.000" overall length 2.390" O.D. 1.820" I.D., Measure before ordering as there were two (2) different lengths
|
FDS475 Outer Hydraulic Lift Rockshaft Arm - 1.80" I.D. 37 Splines
|
MFS3948 Single Hydraulic Remote Valve With Lever - This valve bolts to the lift cover. Outlets are 1/2" pipe thread
|
MFS3633 Dual Hydraulic Remote Valve Kit
|
MFS3746 Front Hydraulic Pump Adapter Plate (Drive Hub) -with Continental & Perkins gas, LP and diesel engines using 3 bolt front pump drive, adapter plate bolts to the crankshaft pulley
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
ABC302 Eyelet Assembly Kit - includes eyelet assembly, nut and lock washer
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
FDS024 Stabilizer Kit, Category 1
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|