Hitch and Hydraulics
389538R1 Leveling Screw Housing - Fits Hydro 70, 544, 656,664, 666 & 686 all with 2 point or 3 point hitches
|
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
IHS4716 Hydraulic Steering Cylinder Repair Kit
|
IHS051 3 Point Leveling Screw Housing - 16 1/2" long, 1-1/8" Acme thread, Category 2
|
|
|
IHS772 Hydraulic Position Control Knob
|
IHS774 Hydraulic Sensitivity Control Knob - 1/8" WIDE SLOT X 9/16" LONG SLOT
|
A-1272964C94 Conversion Kit, Remote Couplers to ISO Remote Couplers
|
IHS4761 Valve Spool Actuator - Fits Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568
|
ABC5634 Cold Forged Hitch Pin with Safety Lock
|
FDS346 Top Link - Category 2, is adjustable from 21-1/4" C.C. on the pinholes to 33" C.C. on the pin holes, hole is 1" in diameter, tube length of 16-3/4"
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
223319 Link, Lift, Category II - All with Telescopic Arm
|
3069069R2 Link, Pin - 3.73" Long, 0.622" Dia
|
223318 Link, Lift, Category I - Complete Lift Link, LH includes Lift Rod, Swivel, Pin, Housing & Nut
|
397096R2 Link, Lift Category II
|
523861R2 Link, Top Handle
|
IHS3009 International 3 Point Hitch Conversion - Fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar
|
IHS1379 Drawbar Pin Retainer Plate - 1.480" long, 1" wide and has a 0.377" hole diameter and 0.193" thick
|
IHS1624 Lower 3 Point Latch Spring - 0.075" thick, 5.896" length, 0.325" hole diameter and 0.200 to 0.755" widths
|
IHS830 Crank Handle For Lift Arm Screw
|
ABC2039 Hydraulic Pump Oil Seal - 1.375" I.D, 2.130" O.D., 0.313" wide
|
A-380319R1 Pump Drive Gear (Hitch) - 61 Teeth
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
|
|