Hitch and Hydraulics
IHS4661 Pressure Regulator Valve Tension Spring - .700" I.D.
|
MHSK1 Deck Stabilizer Kit
|
IHS3596 U Shaped Drawbar, Farmall Cub, International Cub Lo-Boy
|
IHS5858 Flow Control Valve Ball Spring - Fits Super A, C, Super C, Cub, 200, 230, 240, 300, 330, 340, 350, 354, 365, 384, 400, 424, 444, 450, 460, 560, 660 - USA Made
|
IHS3590 Swinging Drawbar Front Anchor Bracket
|
IHS4384 Hydraulic Pump Oil Seal, Touch-Control Pump Shaft (OEM)
|
IHS521 Touch Control Stop - Includes original style handle
|
IHS5602 Hydraulic Level Friction Spring
|
IHS3479 Cub Hydraulic Pump Gasket, O-Ring and Seal Kit
|
IHS3027 Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits both early and late touch control blocks
|
IHS3516 Touch Control Valve Boot - These piston sleeve boots are made of leather and include the wire, just like original, 2-1/2" long
|
IHS3508 Touch Control Piston Sleeve Boot - These piston sleeve boots are made of leather and include the wire, just like original, 5-1/2" long
|
ABC5634 Cold Forged Hitch Pin with Safety Lock
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
IHS157 Drawbar End Brackets
|
|
IHS1378 Front Drawbar Pin - 1 1/4" diameter --- 3 3/4" long
|
IHS566 Swinging Drawbar Hardware Kit
|
IHS2024 Touch Control Piston Sleeve Boot 2.425" overall length, 0.875" hole dia. one end, 0.530" hole dia. one end, 1.235" boot O.D.
|
IHS213 Drawbar Bolt Only - 5/8" - 11 NC 1-3/4 overall length 1" useable length, swinging drawbar anchor to final drive housings
|
IHS2020 Touch Control Valve Boot - 2.450" overall length. 1.755" hole dia. one end, 0.725" hole dia. one end. 1.500" boot outside dia.
|
IHS3484 Touch Control Hydraulic Filter Strainer Cartridge - 1.625" O.D., 1.490" I.D., 6.484" overall length
|
IHS024 Wedge Bolt and Nut Only - Open and closed cultivator shank clips, 5/8" diameter thread, 4-1/4" long
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
|
|