MHSK1 Deck Stabilizer Kit
|
ABC4704 Hydraulic Pump Gasket
|
ABC4701 Hydraulic Pump Gasket
|
ABC4698 Pesco Hydraulic Pump Rear Oil Seal
|
IHS097 Bolster Pivot Pin - 1-1/4" diameter, 8-1/2"long, Rowcrops only (will not fit standards/wheatlands)
|
IHS284 Live Hydraulic Pump - 12.6 GPM @ 1450 RPM, 1200 PSI, does not fit Diesels Tractors
|
IHS1240 Hydraulic Pump Flange - 3/4" NPT inlet and outlet --- threaded for hydraulic hose
|
IHS3089 Hydraulic Belly Pump Filler Pipe & Control Rod Dust Seal Spring - 1.480" Length ** 1.125" I.D. ** 0.065" wire thickness
|
IHS3095 Hydraulic Belly Pump Oil Outlet Elbow Dust Seal Spring - 1.060" O.D. ** 1.475" Length ** 0.065" wire thickness
|
IHS3100 Hydraulic Belly Pump Filler Pipe & Control Rod Metal Washer - 2" O.D. x 1" O.D. hole x 0.062" thick
|
IHS3091 Hydraulic Belly Pump Filler Pipe & Control Rod Felt Washer - 2" O.D. ** 1" I.D. ** 0.125" Thick
|
IHS3072 Hydraulic Pump Control Rod - 39-3/4" long and the O.D. is 3/8"
|
IHS3104 Hydraulic Belly Pump Oil Outlet Elbow Metal Washer - 2" O.D. x 7/8" I.D. hole x 0.062" thick
|
IHS3079 Hydraulic Pump Control Rod - 22-1/4" long, 3/8" diameter & has one (1) 3/8"-16 UNC threaded end
|
IHS366 Lift All Control Rod Spring / Flat Hold-Down Spring - For Hydraulic Pump Lift Lever
|
IHS3098 Hydraulic Belly Pump Oil Outlet Elbow Felt Washer - 2" O.D. ** 0.750" I.D. ** 0.125" Thick
|
IHS1440 Farmall H and M Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe. --- 11.800" Long
|
IHS3473 Hydraulic Cylinder Seal Kit - with remote 3-1/2" x 8" hydraulic cylinder attachment
|
IHS3076 Hydraulic Auxiliary Control Valve Control Rod - Rod is 43-1/2" long and the O.D. is 3/8"
|
ABC5634 Cold Forged Hitch Pin with Safety Lock
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
IHS3009 International 3 Point Hitch Conversion - Fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar
|
IHS1378 Front Drawbar Pin - 1 1/4" diameter --- 3 3/4" long
|
IHS914 Farmall M Straight Swinging Drawbar - Fits Farmall M - Bare Steel, 3/4" thick X 2-1/2" wide, Oval hole in end where pin goes thru just like original
|
IHS916 Straight Swinging Drawbar - Fits IH/Farmall MTA, Super M, 400, 450, 560, 656 (Rowcrop Only) - Bare Steel, 1" thick X 2-1/2" wide,Oval hole in end where pin goes thru just like original
|
IHS1379 Drawbar Pin Retainer Plate - 1.480" long, 1" wide and has a 0.377" hole diameter and 0.193" thick
|