IHS4650 Safety Valve Bushing Tension Spring
|
IHS5508 Hydraulic Manifold Gasket
|
IHS5058 IHC 2-1/2" X 8" Cylinder O-Ring and Seal Kit
|
IHS5602 Hydraulic Level Friction Spring
|
IHS1924 Hydraulic Pump Gear - 16 Teeth, Gas, w/ 9 GPM side engine mounted pump
|
IHS3511 Thompson Hydraulic Pump Gasket, O-Ring and Seal Kit - Repairs Thompson pump #'s 360945R91 and 360945R92 hydraulic pumps. 9 piece kit
|
ABC315 Hydraulic Lift Piston O-Ring - This O-Ring installs toward head of the lift cylinder piston, for 2 1/2" lift cylinder piston. 2.100" I.D., 2.500" O.D., 0.210" thick
|
IHS4243 Hydraulic Pump Mounting Gasket & O-Ring Kit
|
IHS3020 Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits all hydraulic touch control blocks for tractors listed
|
IHS706 Auxiliary Control Valve Boot - 1 end = .485 I.D.; 1 end = 1.130 I.D.; 1 1/4" compressed length; approx. 2" stretched length
|
IHS3886 Rockshaft Clevis Pin Link Lock - 3.990" link overall length 1.735" pin overall length Yellow/clear zinc, Exact copy of the original
|
IHS3516 Touch Control Valve Boot - These piston sleeve boots are made of leather and include the wire, just like original, 2-1/2" long
|
IHS3508 Touch Control Piston Sleeve Boot - These piston sleeve boots are made of leather and include the wire, just like original, 5-1/2" long
|
IHS3491 Touch Control Hydraulic Strainer With Gasket - 9.460" overall length 1.850" screen O.D. (x4) 1/4" bolt hole flange 1.890" center-to-center holes
|
ABC5634 Cold Forged Hitch Pin with Safety Lock
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
523861R2 Link, Top Handle
|
520067R1 Link, Fork - 9.38" Overall Length, 7/8 - 9 UNC, RH Thread
|
IHS2024 Touch Control Piston Sleeve Boot 2.425" overall length, 0.875" hole dia. one end, 0.530" hole dia. one end, 1.235" boot O.D.
|
IHS836 Touch Control Clevis Pin - 1/2" diameter x 1-9/16" total length. It has 1-3/8" usable body length. It has a 3/4" wide head
|
IHS2020 Touch Control Valve Boot - 2.450" overall length. 1.755" hole dia. one end, 0.725" hole dia. one end. 1.500" boot outside dia.
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
ABC1431 Toplink Pin - For tractors using category 1 3-point hitch 3/4" diameter 2-3/4" useable length 4-5/8" overall length
|
S.57841 Hydraulic Pump - Fits tractors listed with Touch Control
|
4076-4 Pioneer Hydraulic Adapter - Adapts International Harvester Old Style Male Tip to Female Body John Deere Old Style
|