IHS4650 Safety Valve Bushing Tension Spring - 0.664" I.D.
|
IHS4661 Pressure Regulator Valve Tension Spring - .700" I.D.
|
IHS5508 Hydraulic Manifold Gasket - USA Made
|
MHSK1 Deck Stabilizer Kit
|
IHS5858 Flow Control Valve Ball Spring - Fits Super A, C, Super C, Cub, 200, 230, 240, 300, 330, 340, 350, 354, 365, 384, 400, 424, 444, 450, 460, 560, 660 - USA Made
|
|
IHS5058 IHC 2-1/2" X 8" Cylinder O-Ring and Seal Kit
|
IHS3520 Thompson Hydraulic Pump Gasket, O-Ring and Seal Kit - For pumps rated at 9 gpm (gallons per minute), 11 piece kit. - USA Made
|
IHS1924 Hydraulic Pump Gear - 16 Teeth, Gas, w/ 9 GPM side engine mounted pump
|
IHS3525 Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit - Repairs Pesco pump # 368894R91. 9 piece kit
|
IHS3506 Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit - Verify pump # before ordering as there were different pumps used by IHC - USA Made
|
IHS4243 Hydraulic Pump Mounting Gasket & O-Ring Kit - USA MADE
|
IHS117C 3 Pt Fast Hitch Prongs - Category 2, Sold as pairs.
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 Hitch Pin 1" x 7-1/2"
|
IHS3069 Fast Hitch Pin with Ball - 3/4" O.D. and is 2-7/8" long
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
FDS211 Drawbar Lock - Category 1 - Keeps 3-Point hitch drawbar from twisting
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
ABC1431 Toplink Pin - For tractors using category 1 3-point hitch 3/4" diameter 2-3/4" useable length 4-5/8" overall length
|
S.8700 IH 8700 Series ISO Conversion Kit
|
GG100 - Hydraulic Pressure Testing Gauge - 100 lbs.
|
GG300 - Hydraulic Pressure Testing Gauge - 300 lbs.
|
GG400 - Hydraulic Pressure Testing Gauge - 400 lbs.
|