MHSK1 Deck Stabilizer Kit
|
ACS6482 Hydraulic Filter - USA Made
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
ACS184 Knob - Rubber, 0.466" hole ID, 1.213" overall length
|
ABC007 Spin On Oil Filter - 5.25" Tall and 3.675" outside diameter --- Spin on style - USA Made
|
ACS302 Hydraulic Transmission Oil Dipstick
|
ABC315 Hydraulic Lift Piston O-Ring - This O-Ring installs toward head of the lift cylinder piston, for 2 1/2" lift cylinder piston. 2.100" I.D., 2.500" O.D., 0.210" thick
|
ACS3761 External Hydraulic Lift Arm Cylinder Seal and Breather Kit
|
ACS3464 Hydraulic Lift Cylinder Packing Kit
|
ACS2509 Lever Knob - Rubber 4.060" overall length 0.445" I.D. hole Outside diameter tapers from 0.775" to 1.120" O.D.
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
ACS017 Top Link Bracket - D14, D15 Top Link Bracket
|
ACS261 DrawBar Yoke Assembly - D14, D15, D17 (Series I & Series II and also Series III with snap coupler hitch)
|
ACS018 Top Link Bracket - D17 Series I, II, & III tractors (except Series IV)
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
FDS346 Top Link - Category 2, is adjustable from 21-1/4" C.C. on the pinholes to 33" C.C. on the pin holes, hole is 1" in diameter, tube length of 16-3/4"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
ACS347 Snap Coupler Repair Kit
|
ACS269 Snap Coupler Spring - 3-1/4" OVERALL LENGTH. *** 4 USED PER TRACTOR -- SOLD INDIVIDUALLY
|
FDS211 Drawbar Lock - Category 1
|
ACS014 3 Point Conversion Kit - Fits D14, D15, D17 WD & WD45
|
ACS011 3 Point Hitch Conversion Kit - Fits Allis D14, D15, WD & WD45 Category 1 --- Lift arms = 5/8" Thick X 3" Wide --- Easy to install and remove
|
ACS012 3 Point Hitch Conversion Kit
|
ACS283 Allis Brake Return and Hydraulic oil control Spring
|
|
ABC362 Gear Shift Bakelite Knob - 1.250" Diameter 3/8" x 24 NF
|