Hitch and Hydraulics
MHSK1 Deck Stabilizer Kit
|
IHS5858 Flow Control Valve Ball Spring - Fits Super A, C, Super C, Cub, 200, 230, 240, 300, 330, 340, 350, 354, 365, 384, 400, 424, 444, 450, 460, 560, 660 - USA Made
|
|
ABC4704 Hydraulic Pump Gasket
|
ABC4701 Hydraulic Pump Gasket
|
ABC4698 Pesco Hydraulic Pump Rear Oil Seal
|
IHS097 Bolster Pivot Pin - 1-1/4" diameter, 8-1/2"long, Rowcrops only (will not fit standards/wheatlands)
|
IHS5058 IHC 2-1/2" X 8" Cylinder O-Ring and Seal Kit
|
IHS284 Live Hydraulic Pump - 12.6 GPM @ 1450 RPM, 1200 PSI, does not fit Diesels Tractors
|
IHS5602 Hydraulic Level Friction Spring
|
IHS1240 Hydraulic Pump Flange - 3/4" NPT inlet and outlet --- threaded for hydraulic hose
|
IHS117B 3 Pt Fast Hitch Prongs Category 2 - Fits International 300, 350, 340, 400, 450, 560, 606, 656, 706, 756, 806, 856, 966, 1206, 1256
|
IHS3473 Hydraulic Cylinder Seal Kit - with remote 3-1/2" x 8" hydraulic cylinder attachment - USA Made
|
IHS3537 Touch Control Hydraulic Strainer With Gasket - 8.235" overall length 2.400" screen OD
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 Hitch Pin 1" x 7-1/2"
|
IHS3069 Fast Hitch Pin with Ball - 3/4" O.D. and is 2-7/8" long
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
IHS3009 International 3 Point Hitch Conversion - Fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar
|
IHS3073 Fast Hitch Lateral Link / Rockshaft Cylinder Pin - 7/8" O.D., is 3-3/16" long (pin only), and is 4-1/2" long (pin with handle)
|
IHS1378 Front Drawbar Pin - 1 1/4" diameter --- 3 3/4" long
|
IHS916 Straight Swinging Drawbar - Fits IH/Farmall MTA, Super M, 400, 450, 560, 656 (Rowcrop Only) - Bare Steel, 1" thick X 2-1/2" wide, Oval hole in end where pin goes thru just like original
|
IHS236 Swinging Drawbar Roller Pin Clevis - pin spacing is 3-7/8" C.C, not for tractors with a fast hitch - USA Made
|
IHS428 Swinging Drawbar Roller Shaft Support
|
IHS830 Crank Handle For Lift Arm Screw
|
IHS674 Drawbar Brace Rod - Forged --- 17-1/4" C.C. HOLE
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
|
|