Hitch and Hydraulics
MHSK1 Deck Stabilizer Kit
|
IHS5858 Flow Control Valve Ball Spring - Fits Super A, C, Super C, Cub, 200, 230, 240, 300, 330, 340, 350, 354, 365, 384, 400, 424, 444, 450, 460, 560, 660 - USA Made
|
IHS6506 Hydraulic Oil Filter - USA Made
|
|
|
IHS6735 Hydraulic Filter Extension Kit - USA Made
|
ABC4550 Hydraulic Filter - fits tractors listed with C135, C153, C200, C221, C263, C291, D166, D188, D236, D239, D282, D312 Engines
|
IHS117B 3 Pt Fast Hitch Prongs Category 2 - Fits International 300, 350, 340, 400, 450, 560, 606, 656, 706, 756, 806, 856, 966, 1206, 1256
|
IHS3473 Hydraulic Cylinder Seal Kit - with remote 3-1/2" x 8" hydraulic cylinder attachment - USA Made
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 Hitch Pin 1" x 7-1/2"
|
IHS3069 Fast Hitch Pin with Ball - 3/4" O.D. and is 2-7/8" long
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
FDS211 Drawbar Lock - Category 1 - Keeps 3-Point hitch drawbar from twisting
|
IHS3009 International 3 Point Hitch Conversion - Fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar
|
IHS1377 Front Drawbar Pin - The length of this pin is 3 7/16"
|
IHS912 Straight Swinging Drawbar - IH Super H, 300, 350, 460 (Rowcrop Only), Bare Steel, 1" thick X 2-1/4" wide, Oval hole in and where the pin goes thru just like the original
|
IHS428 Swinging Drawbar Roller Shaft Support
|
IHS674 Drawbar Brace Rod - Forged --- 17-1/4" C.C. HOLE
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
ABC1431 Toplink Pin - For tractors using category 1 3-point hitch 3/4" diameter 2-3/4" useable length 4-5/8" overall length
|
S.8700 IH 8700 Series ISO Conversion Kit
|
GG100 - Hydraulic Pressure Testing Gauge - 100 lbs.
|
GG300 - Hydraulic Pressure Testing Gauge - 300 lbs.
|
GG400 - Hydraulic Pressure Testing Gauge - 400 lbs.
|
|
|