JDS2359 Touch-O-Matic Gasket Set
|
MHSK1 Deck Stabilizer Kit
|
JDS7314 3-Point Spring Pin - Fits John Deere: GP,
H,
M,
MT,
320,
330,
40,
420,
430,
435,
1010 - USA Made
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
JDS500 Oil Fill Breather Cap on Allis and Hydraulic Fill Cap on John Deere's - 1.5" Tall --- includes clip, fits over a 1.5" pipe
|
JDS463 Washer - This is for the locking nut style coupler
|
JDS426T Coupler - For Locking Nut Style Coupler, 1/2" Pipe Thread
|
JDS426 Hydraulic Coupler With Cover - This coupler is designed for early tractors with the locking nut style coupler
|
JDS426CVR Cover - It is designed for tractors with the locking nut style coupler
|
JDS427CVR Cover - Ford Swinging style lever Power-Trol
|
JDS427S Coupler Only (No Cover) - Swinging style lever Power-Trol, 1/2" pipe thread - USA Made
|
JDS427 Hydraulic Coupler With Cover - Swinging style lever Power-Trol, 1/2" pipe thread
|
JDS3395 Hydraulic Block-Off 'Dummy' Plug - 0.685" O.D. 5.377" overall length For locking nut style coupler
|
JDS772 Hydraulic Block Off Plug - Swinging style lever Power-Trol, 1/2" pipe thread
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 Hitch Pin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
ABC4185 Top Link Reducer Bushing, Category 2 to Category 1 - 0.750" I.D., 1.000" O.D., 1-15/16" length
|
JDS315 Drawbar Lift Link - 11" C.C. on pinholes
|
JDS320 Drawbar Lift Link Pin With Spring - 2.175" Length to head, 2.375" overall including head, 0.400" Diameter
|
JDS316 John Deere M Drawbar Lift Link - 14 C.C on pinholes
|
|
JDS1488 Drawbar Pivot Pin With Handle - Bare steel, 0.750" O.D., 2.580" overall height, 2.281" useable length below handle
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
ABC1431 Toplink Pin - For tractors using category 1 3-point hitch 3/4" diameter 2-3/4" useable length 4-5/8" overall length
|
GG100 - Hydraulic Pressure Testing Gauge - 100 lbs.
|
GG300 - Hydraulic Pressure Testing Gauge - 300 lbs.
|