Hitch, Hydraulics & PTO
MHSK1 Deck Stabilizer Kit
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
ABC2008 PTO Oil Seal - 1.375" ID, 2.110 OD, 0.315" Wide
|
IHS740 Power Steering Priority Flow Control Valve - Must be used with open center live hydraulics ONLY, Eliminates the belt driven pump, pulleys & bracket
|
ABC3000 Vane Pump Inner Pump Shaft Bearing - Fits 820 & 830 2-cylinder - Sealed, 0.787" I.D., 1.850" O.D., 0.551" wide
|
ABC2008 Bolster Shaft Oil Seal - 1.375" ID, 2.110 OD, 0.315" Wide
|
MIS118 PTO Over Running Clutch - 1 1/8" Female-- To -- 1 3/8" Male 6 Spline Must have existing hole in pto shaft for roll pin, For tractors up to 75 horsepower
|
ABC1550 Oil Seal, PTO Pump Inner Seal - 1.375" I.D., 2.254" O.D., .312" width
|
IHS1545 PTO Oil Seal, Single Lip Style
|
MIS138 PTO Over Running Clutch - 1-3/8" female to 1-3/8" male. 6 spline 6-3/4" overall length
|
COS007 3 Point Upper Lift Arm - Left Hand, Not the same as the original
|
COS008 3 Point Upper Lift Arm - Right Hand, Not the same as the original
|
ABC2010 Category 1 Adjustable Stabilizer Bar - Adjustable ends for desired length, adjust from 27-1/2" to 37" length. 23" center tube length. 7/8" threaded ends. 7/8" pin holes
|
FDS023 Top Link - Category 1, 16" long tube, 3/4" holes at both ends
|
FDS022 3 Point Drawbar - Category 1, black primer, measures 1" x 2-1/2" x 26", (approximately 31-1/2" overall length, pin to pin) with a 7/8" pin size
|
FDS346 Top Link - Category 2, is adjustable from 21-1/4" C.C. on the pinholes to 33" C.C. on the pin holes, hole is 1" in diameter, tube length of 16-3/4"
|
MIS4560 Hitch Pin 7/8" x 6-1/2"
|
MIS4555 Hitch Pin 3/4" x 6-1/2"
|
MIS4563 HitchPin 1" x 7-1/2"
|
ABC1433 Lift Arm / Top Link Reducer Bushing - For tractors with Category 2 3 PT hitch switching to category 1 3PT. ***7/8" ID --- 1-1/8" OD --- 1-3/8" overall Length***
|
FDS211 Drawbar Lock - Category 1
|
FDS367 Leveling Box Fork - 10-1/2" Overall Length, 3/4" UNC Thread, 1/2" Between Ears
|
MIS119 3 Point Lynch Pin - 0.420" dia. pin 1-5/8" useable length 1-5/8" dia. ring For use with all 3-point equipped tractors and/or implements using 7/16" dia. Pins
|
ABC1427 3 Point Top Link Pin - Category 1, 3/4" O.D., 4-3/4" useable length, 6-1/2" overall length
|
ABC1429 3 Point Top Link Pin - Category 2, 1" O.D., 4-1/2" useable length, 6" overall length
|
ABC1431 Toplink Pin - For tractors using category 1 3-point hitch 3/4" diameter 2-3/4" useable length 4-5/8" overall length
| |
|
|