ABC065 Ignition Switch, Key Switch
|
ABC6411 Flame-Thrower II Ignition Coil - USA Made
|
EIGN289 Electronic Ignition II Kit, 12 Volt Negative Ground - USA Made
|
IHS5738 Transmission Countershaft Bushing - USA Made
|
ABC310 Ignition Tune-Up Kit With Rotor - only fits Autolite distributors with 3-3/8" OD cap, Will not fit models IGZ or IGW distributors
|
ABC328 Ignition Tune-Up Kit - Points and condenser. --- Only fits Autolite distributors with 3-3/8" OD cap. Will not fit IGZ or IGW distributors
|
ABC4410 Prestolite Condensor -
|
ABC170 Autolite Spark Plug - 18 mm thread diameter 1/2" reach 7/8" hex Medium hot Std Tip / Resistor Plug gap 0.025"
|
EIGN28 Electronic Ignition Kit - 12 Volt Negative Ground - USA MADE
|
ABC518 Autolite Rotor Button - Fits AUTOLITE Distributors With 3 3/8" O.D. Clip Held Cap---Will not fit IGZ or IGW distributors
|
ABC137 Distributor Cap - This is for Autolite distributors with CLIP held cap. Will not Fit IGW or IGZ distributors
|
ABC4235 Distributor Dust Cover with Felt Seal - fits Autolite distributors only with 3-3/8" O.D. caps
|
ABC011 6 Volt Distributor Coil - Metal housing, mounting bracket included-- fits tractors with barrel-type coil
|
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC4293 6 Volt Flame Thrower Coil - Use with electronic ignition kits or breaker point ignitions Note: Do not use an external resistor on 6 volt electrical systems
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ABC2863 Spark Plug Wire Set - This wiring set is cut to length, has waterproof neoprene, has 7 mm "tinned" copper core, and includes the coil wire
|
ABC326 Spark Plug Wire Set 6 Cylinder - Copper Core. 35" long waterproof neoprene w/ 90 degree boots. You will have to cut the wires to your desired length & Crimp End W/ A Crimping Tool. - USA Made
|
ABC516 Tailored Original Style Spark Plug Wire Set - Copper core; Black Cotton Braided Cover, Straight boots one end, exposed spark plug terminals on the other end, Tailored original style. - USA Made
|
ACS228 Spark Plug Wire Set - Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire.
|
FDS149 Spark Plug Wiring Set 4 Cylinder - This spark plug wires set fits most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion. And 90 degree boots.
|
MHS1430 Spark Plug Wiring Set - Copper Core
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
ABC4296 Spark Plug Wiring Set with Straight Boots, 6-cyl.
|
ABC4300 Spark Plug Wiring Set with 90 degree Boots, 6-cyl. - USA MADE
|
ABC4309 Spark Plug Wiring Set for Electronic Ignition with 90 degree Boots -
|