IHS5713 Distributor Gasket - USA Made
|
|
IHS5560 Distributor Primary Screw & Insulator Kit, Power Inlet
|
ABC170 Autolite Spark Plug - 18 mm thread diameter 1/2" reach 7/8" hex Medium hot Std Tip / Resistor Plug gap 0.025"
|
IHS848 Ignition Tune Up Kit - For International 6 cylinder models & some 4 cylinder engines Point Gap = 0.020" Includes: rotor, point set and condenser
|
EIGN29 Electronic Ignition Kit, 12 Volt Negative Ground - Fits distributors with a clip held cap., Counter Clockwise rotation. - USA MADE
|
IHS703 Rotor Button - This rotor button will fit the IH Horizontal Distributor 353898R11
|
IHS947 6 Cylinder Distributor Cap - Fits International Distributors Only
|
IHS763 IH Distributor Dust Cover - this cannot be used on Cub models that have a J4 magneto. Will also fit distributor # 368051R1 & 401107R1.
|
IHS2531 Distributor Hold Down Clamp - For IH built distributor with 5/16" hold down bolt. 2 used per engine, sold individually.
|
IHS974 Insulator - This spring anchor terminal insulator is designed for the IH distributor (353898R11) and for J4 magnetos with a serial number higher than 139748.
|
IHS988 Terminal Screw - This product is a zinc plated Terminal Screw only
|
IHS737 Distributor Cap Spring Clip Bracket Screw With Lock Washer - SCREW SIZE: 8-32 X 3/8" SLT RD, HD MACHINE
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ABC2863 Spark Plug Wire Set - This wiring set is cut to length, has waterproof neoprene, has 7 mm "tinned" copper core, and includes the coil wire
|
ABC326 Spark Plug Wire Set 6 Cylinder - Copper Core. 35" long waterproof neoprene w/ 90 degree boots. You will have to cut the wires to your desired length & Crimp End W/ A Crimping Tool. - USA Made
|
ABC5841 Spark Plug Wiring Set w/ Straight Boots, 6 cyl. - USA Made
|
IHS2537 Tailored Spark Plug Wire Set - This spark plug wire set comes pre-assembled, is tailored, has copper core with aluminum coating to prevent corrosion, and uses waterproof neoprene.
|
ABC4296 Spark Plug Wiring Set with Straight Boots, 6-cyl.
|
ABC4300 Spark Plug Wiring Set with 90 degree Boots, 6-cyl. - USA MADE
|
IHS4325 Spark Plug Wiring Set (Pre-assembled) with Straight Boots, 6-cyl. - Graphite carbon core for Electronic Ignition
|
IHS1294 Insulating Terminal Washer - This product is a fiber washer measuring: 0.167" Inside Diameter, 0.563" Outside Diameter and 0.135" Thick. Also fits distributor numbers: 353898R1, 368051R1, 401107R1
|
IHS3268 Ignition Switch with Keys - 6-spade terminal 0.250" wide, 0.775" hole opening, Check spade width on your switch before ordering.
|
IHS831 Ignition Key Switch Includes 2 keys - 3 position, 5 spade terminals, for 0.800"-hole dia., 3/4'-20 UNEF Stem USA MADE
|
KEY05 Ignition Key Verify key style before ordering, as more than one style could be used
|
ABC400 Ignition Key Switch - For battery ignition only, 3/4" Dia thread, 4 terminals --- 4 position switch, has 4 stud terminals --- Includes 2 keys
| |