IHS1716 Distributor, Horizontal - CAST STEEL HOUSING LIKE ORIGINAL!
|
ABC4423 Ignition Tune-Up Kit with rotor - Fits Prestolite IBT-4101R, IBT-4101S, IBT-4101U, IBT-4301B, IBT-4301C & IBT4301D
|
IHS370 Horizontal Distributor Ignition Tune Up Kit - This will NOT fit any magnetos or Delco or Prestolite brand distributors. Plug Gap = .025, Point Gap = .020
|
IHS846 IH Ignition Tune Up Kit - For 4 cyl. models using IH HORIZONTAL distributor number 353898R11 or (VERTICAL distributor 460 & 560 Only) number with 367839R92 or 371579R92. It will not fit Delco or Prestolite distributors.
|
ABC6494 Rotor - Prestolite - USA Made
|
IHS703 Rotor Button - This rotor button will fit the IH Horizontal Distributor 353898R11
|
IHS6356 IH Distributor and J4 Magneto Condenser
|
|
ABC121 Distributor Cap - Fits 353898R11 IH horizontal distributor, Also fits Cub with J4 magneto - USA Made
|
IHS2531 Distributor Hold Down Clamp - For IH built distributor with 5/16" hold down bolt. 2 used per engine, sold individually.
|
IHS3112 Distributor Drive Housing - USE TO CHANGE OVER FROM A MAGNETO, OR TO ADD A TACHOMETER DRIVE TO YOUR TRACTOR. The tachometer drive parts or tach drive block off plate are sold separately.
|
IHS3125 Distributor Tachometer Drive Housing Block Off Plate w/ Gasket - Used to cover tach drive opening when not equipped with tachometer.
|
IHS737 Distributor Cap Spring Clip Bracket Screw With Lock Washer - SCREW SIZE: 8-32 X 3/8" SLT RD, HD MACHINE
|
IHS739 Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11.
|
IHS766 Distributor Drive Gear
|
IHS815 Distributor Drive Shaft - This is NOT the shaft that the points contact or the weights attach to, This IS the shaft that will fall out of the distributor if removed from the tractor
|
IHS974 Insulator - This spring anchor terminal insulator is designed for the IH distributor (353898R11) and for J4 magnetos with a serial number higher than 139748.
|
IHS988 Terminal Screw - This product is a zinc plated Terminal Screw only
|
IHS3166 IH Distributor Shaft Bushing and Shim Kit - This is a 5-piece kit. The length is 2.006".
|
ABC4181 Distributor Drive Housing Bushing - 0.630" I.D., 0.750" O.D., 0.970" long
|
IHS763 IH Distributor Dust Cover - this cannot be used on Cub models that have a J4 magneto. Will also fit distributor # 368051R1 & 401107R1.
|
IHS5560 Distributor Primary Screw & Insulator Kit, Power Inlet
|
IHS4457 Distributor Drive Gasket - USA Made
|
IHS5659 Distributor Dust Cover Felt Seal
|
IHS1294 Insulating Terminal Washer - This product is a fiber washer measuring: 0.167" Inside Diameter, 0.563" Outside Diameter and 0.135" Thick. Also fits distributor numbers: 353898R1, 368051R1, 401107R1
|
ABC556 Distributor Or Magneto Mounting Gasket - USA Made
|
IHS4375 OEM Seal (OEM Magneto or Distributor Drive)
|
IHS237 12 Volt Distributor Coil - This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals.
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
|