ABC4408 Ignition Tune Up Kit without Rotor - For Delco Distributors listed with Screw Held Caps
|
ABC6494 Rotor - Prestolite - USA Made
|
ABC6201 Rotor - Fits models with Delco Screw Held Cap, USA Made
|
IHS6356 IH Distributor and J4 Magneto Condenser
|
|
IHS2531 Distributor Hold Down Clamp - For IH built distributor with 5/16" hold down bolt. 2 used per engine, sold individually.
|
IHS5713 Distributor Gasket - USA Made
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
ABC6411 Flame-Thrower II Ignition Coil - USA Made
|
|
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ABC324 Autolite Spark Plug - 18 MM thread diameter 1/2" reach 7/8" Hex Medium hot Power tip/non resistor
|
ACS228 Spark Plug Wire Set - Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire.
|
FDS149 Spark Plug Wiring Set 4 Cylinder - This spark plug wires set fits most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion. And 90 degree boots.
|
ABC4309 Electronic Ignition Spark Plug Wiring Set
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
EIGN24 Electronic Ignition Kit - 12 Volt Negative Ground w Delco Distributor with Screw Held Cap and Counter Clockwise Rotation - Check your Distributor Number Before Ordering - USA MADE
|
EIGN31 Electronic Ignition Kit - 12 Volt Negative Ground - USA Made
|
R3525 Electronic Ignition Kit - 12 Volt Positive Ground w Delco Distributor with Screw Held Cap Check your Distributor Number Before Ordering
|
EIGN179 Electronic Ignition II Kit for 4 Cylinder IH distributor with clip mounted cap - USA Made
|
EIGN249 Electronic Ignition II Kit, 12 Volt Negative Ground - USA Made
|
EIGN319 Electronic Ignition II Kit, 12 Volt Negative Ground - USA Made
|
| |