ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
IHS5560 Distributor Primary Screw & Insulator Kit, Power Inlet
|
IHS370 Horizontal Distributor Ignition Tune Up Kit - This will NOT fit any magnetos or Delco or PrestoLite brand distributors. Plug Gap = .025, Point Gap = .020
|
IHS846 IH Ignition Tune Up Kit - For 4 cyl. models using IH HORIZONTAL distributor number 353898R11 or (VERTICAL distributor 460 & 560 Only) number with 367839R92 or 371579R92. It will not fit Delco or Prestolite distributors.
|
IHS703 Rotor Button - This rotor button will fit the IH Horizontal Distributor 353898R11
|
ABC121 Distributor Cap - Fits 353898R11 IH horizontal distributor, Also fits Cub with J4 magneto
|
IHS763 IH Distributor Dust Cover - this cannot be used on Cub models that have a J4 magneto. Will also fit distributor # 368051R1 & 401107R1.
|
IHS2531 Distributor Hold Down Clamp - For 5/16" hold down bolt & IH Built Distributor. 2 used per engine, sold individually.
|
IHS815 Distributor Drive Shaft - This is NOT the shaft that the points contact or the weights attach to,This IS the shaft that will fall out of the distributor if removed from the tractor
|
IHS739 Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11.
|
IHS3112 Distributor Drive Housing - USE TO CHANGE OVER FROM A MAGNETO, OR TO ADD A TACHOMETER DRIVE TO YOUR TRACTOR. The tachometer drive parts or tach drive blockoff plate are sold separately.
|
ABC4181 Distributor Drive Housing Bushing - 0.630" I.D., 0.750" O.D., 0.970" long
|
IHS4457 Distributor Drive Gasket
|
IHS3166 IH Distributor Shaft Bushing and Shim Kit - This is a 5-piece kit. The length is 2.006".
|
IHS766 Distributor Drive Gear - 32 TEETH This is used on models when equipped with IH Distributor 353898R11. Drive pin hole thru both sides like original.
|
IHS974 Insulator - This spring anchor terminal insulator is designed for the IH distributor (353898R11) and for J4 magnetos with a serial number higher than 139748.
|
IHS988 Terminal Screw - This product is a zinc plated Terminal Screw only
|
IHS737 Distributor Cap Spring Clip Bracket Screw With Lock Washer - SCREW SIZE: 8-32 X 3/8" SLT RD, HD MACHINE
|
|
ABC348 Vertical Hot Coil 12 Volt Externally Resisted 55000 - Delco distributors WITH SCREW HELD CAP --- Kit contains: Heavy duty point set vibration resistant condenser and rotor
|
IHS234 6 Volt Distributor Coil - This is an International Harvester OEM style 6 volt distributor coil. This distributor coil has a 1.4 ohm rating between the two primary winding terminals.
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
IHS237 12 Volt Distributor Coil - This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor.
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
IHS842 Coil Bracket - Fits Original Style International Coils IHS234 and IHS237
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ACS228 Spark Plug Wire Set - Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire.
|
FDS149 Spark Plug Wiring Set 4 Cylinder - This spark plug wires set fits most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion. And 90 degree boots.
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
ABC4309 Spark Plug Wiring Set for Electronic Ignition with 90 degree Boots -
|