IHS6671 Distributor Drive Housing with Block Off Plate
|
IHS7490 Magneto Conversion Base Kit
|
IHS1716 Distributor, Horizontal - CAST STEEL HOUSING LIKE ORIGINAL!
|
IHS6219 6 Volt Electronic Horizontal Distributor, Farmall
|
IHS6209 12 Volt Electronic Ignition Horizontal Distributor - GAS ONLY)
|
ABC018 Premium Delco Ignition Tune-Up Kit with Rotor - For use on tractors using Delco-Remy distributors with clip held cap through 1963 Delco Distributors Only
|
IHS370 Horizontal Distributor Ignition Tune Up Kit - This will NOT fit any magnetos or Delco or Prestolite brand distributors. Plug Gap = .025, Point Gap = .020
|
IHS846 IH Ignition Tune Up Kit - For 4 cyl. models using IH HORIZONTAL distributor number 353898R11 or (VERTICAL distributor 460 & 560 Only) number with 367839R92 or 371579R92. It will not fit Delco or Prestolite distributors.
|
ABC3007 Delco Distributor Shaft Bushing and Shim Kit - has an 0.486" I.D., 0.656" O.D. and 2.867" length. Bushing must be sized to shaft after installation
|
ABC488L Spring Clip And Longer Bracket - Distributor caps use one each of ABC488L & ABC488S FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC488S Spring Clip And Shorter Bracket - Distributor caps use one each of ABC488L & ABC488S - FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC498 Delco Distributor Terminal Insulator Assembly - Fits distributor housings with 0.345" diameter round hole, Will not fit IH built distributors / magnetos
|
ABC500 Delco Distributor Terminal Insulator - Square was the late style that fit distributor housings with .300 Dia hole with a keyway, WILL NOT FIT IH BUILT DISTRIBUTORS/MAGNETOS
|
ABC2523 Distributor Hold Down Clamp - Used when converting from Magneto to Delco Distributor
|
IHS3528 International H4 Magneto Point Set
|
|
|
|
FXH2024 Condensor Wico - Fits XH & XB Only
|
ABC520 Delco Rotor Button - Tractors using Delco-Remy distributors with clip held cap through 1963
|
|
IHS703 Rotor Button - This rotor button will fit the IH Horizontal Distributor 353898R11
|
IHS6356 IH Distributor and J4 Magneto Condenser
|
ABC276 Distributor Cap - Fit tractors using Delco-Remy distributors with clip held cap through 1963.
|
ABC6165 Premium Delco Distributor Cap - USA Made
|
ABC121 Distributor Cap - Fits 353898R11 IH horizontal distributor, Also fits Cub with J4 magneto - USA Made
|
IHS2531 Distributor Hold Down Clamp - For IH built distributor with 5/16" hold down bolt. 2 used per engine, sold individually.
|
IHS3112 Distributor Drive Housing - USE TO CHANGE OVER FROM A MAGNETO, OR TO ADD A TACHOMETER DRIVE TO YOUR TRACTOR. The tachometer drive parts or tach drive block off plate are sold separately.
|
IHS3125 Distributor Tachometer Drive Housing Block Off Plate w/ Gasket - Used to cover tach drive opening when not equipped with tachometer.
|
IHS737 Distributor Cap Spring Clip Bracket Screw With Lock Washer - SCREW SIZE: 8-32 X 3/8" SLT RD, HD MACHINE
|
IHS739 Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11.
|