IHS1294 Insulating Terminal Washer - This product is a fiber washer measuring: 0.167" Inside Diameter, 0.563" Outside Diameter and 0.135" Thick. Also fits distributor numbers: 353898R1, 368051R1, 401107R1
|
ABC556 Distributor Or Magneto Mounting Gasket - USA Made
|
IHS6217 Magneto/Distributor Bracket Gasket - USA Made
|
ABC011 6 Volt Distributor Coil - Metal housing, mounting bracket included-- fits tractors with barrel-type coil
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
IHS234 6 Volt Distributor Coil - This is an International Harvester OEM style 6 volt distributor coil. This distributor coil has a 1.4 ohm rating between the two primary winding terminals.
|
IHS237 12 Volt Distributor Coil - This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals.
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC4293 6 Volt Flame Thrower Coil - Use with electronic ignition kits or breaker point ignitions Note: Do not use an external resistor on 6 volt electrical systems
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
ABC6411 Flame-Thrower II Ignition Coil - USA Made
|
|
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
IHS842 Coil Bracket - Fits Original Style International Coils IHS234 and IHS237
|
ABC170 Autolite Spark Plug - 18 mm thread diameter 1/2" reach 7/8" hex Medium hot Std Tip / Resistor Plug gap 0.025"
|
ABC324 Autolite Spark Plug - 18 MM thread diameter 1/2" reach 7/8" Hex Medium hot Power tip/non resistor
|
ACS228 Spark Plug Wire Set - Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire.
|
FDS149 Spark Plug Wiring Set 4 Cylinder - This spark plug wires set fits most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion. And 90 degree boots.
|
IHS799 Tailored Spark Plug Wiring Set - Fits IH Models listed using a distributor or magneto. These wires have a copper core with aluminum coating to prevent corrosion. This set has a waterproof neoprene covering.
|
ABC4309 Electronic Ignition Spark Plug Wiring Set
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
IHS4330 Spark Plug Wiring Set (Pre-assembled) for Electronic Ignition with 90 degree Boots
|
EIGN05 Electronic Ignition Kit - 6 Volt Positive Ground System, ONLY fitting an International Distributor - USA MADE
|
EIGN17 Electronic Ignition Conversion Kit - 12 Volt Negative Ground for 4 cylinder IH distributor with clips - USA MADE
|
ABC486 H4 Magneto Gasket Set
|
XH1344 Magneto - USA Made
|
ABC120 International H4 Ignition Tune Up Kit
|
FXH2100B Point Set Fits WICO XH & XB Only
|
IHS6359 Magneto Point Set
|