FDS335 Rear Ball Joint Dust Cover
|
MFS6726 Lucas Ignition Point Set, Late
|
MFS3307 New Replacement Distributor
|
MFS6650 Electronic Distributor (For 12-Volt Negative Ground)
|
MFS4389 Ignition Tune Up Kit - Fits Massey Ferguson models listed with Standard Motors and Lucas 25D Distributors
|
MFS4396 Ignition Tune Up Kit - Fits Early Lucas Distributors, check points to identify
|
ABC4415 Condenser - Fits models listed with a Lucas distributor marked 3044213R91
|
|
ABC2633 Distributor Cap for Lucas Distributor - For threaded spark plug wire ends.
|
ABC011 6 Volt Distributor Coil - Metal housing, mounting bracket included-- fits tractors with barrel-type coil
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC4293 6 Volt Flame Thrower Coil - Use with electronic ignition kits or breaker point ignitions Note: Do not use an external resistor on 6 volt electrical systems
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
ABC6411 Flame-Thrower II Ignition Coil - USA Made
|
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ABC170 Autolite Spark Plug - 18 mm thread diameter 1/2" reach 7/8" hex Medium hot Std Tip / Resistor Plug gap 0.025"
|
ABC171 Autolite Spark Plug - 18mm thread diameter 1/2" reach 7/8" hex Hot heat range Std Tip / Resistor
|
ABC4088 Spark Plug (Autolite)
|
ACS228 Spark Plug Wire Set - Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire.
|
FDS149 Spark Plug Wiring Set 4 Cylinder - This spark plug wires set fits most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion. And 90 degree boots.
|
MFS105 Spark Plug Wiring Set - These wires have a copper core with aluminum coating to prevent corrosion. --- PREMIUM QUALITY --- NO CUTTING OR FITTING REQUIRED ***
|
MFS2186 Tailored Spark Plug Wire Set
|
ABC4309 Electronic Ignition Spark Plug Wiring Set
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
ABC4340 Spark Plug Wiring Set (Pre-assembled) with Straight Boots, 4-cyl. - For Tractors with Electronic Ignition
|
ABC400 Ignition Key Switch - For battery ignition only, 3/4" Dia thread, 4 terminals --- 4 position switch, has 4 stud terminals --- Includes 2 keys
| |