|
|
ABC018 Premium Delco Ignition Tune-Up Kit with Rotor - For use on tractors using Delco-Remy distributors with clip held cap through 1963 Delco Distributors Only
|
JDS266 Ignition Tune-Up Kit - FOR DELCO DISTRIBUTOR THRU 1963 --- USING 14MM, 7/16" REACH --- 13/16 HEX SPARK PLUG --- KIT CONTAINS: ROTOR, POINTS, CONDENSER, SPARK PLUGS, Spark Plug GAP = .025, Point GAP = .020
|
ABC3007 Delco Distributor Shaft Bushing and Shim Kit - has an 0.486" I.D., 0.656" O.D. and 2.867" length. Bushing must be sized to shaft after installation
|
ABC488L Spring Clip And Longer Bracket - Distributor caps use one each of ABC488L & ABC488S FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC488S Spring Clip And Shorter Bracket - Distributor caps use one each of ABC488L & ABC488S - FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC498 Delco Distributor Terminal Insulator Assembly - Fits distributor housings with 0.345" diameter round hole, Will not fit IH built distributors / magnetos
|
ABC3978 Ignition Points Only (for Delco Distributor with Clip Held Cap) - For tractors using Delco-Remy distributors only
|
|
ABC520 Delco Rotor Button - Tractors using Delco-Remy distributors with clip held cap through 1963
|
JDS587 Distributor Cap - Fits John Deere M,320, 330, 40, 420, 430, 440 {60 SN 6026000, 70 Propane All with Delco distributor Clip held cap
|
IHS2531 Distributor Hold Down Clamp - For IH built distributor with 5/16" hold down bolt. 2 used per engine, sold individually.
|
ABC186 Distributor Dust Cover With Felt Gasket And Washer - Fits tractors using Delco-Remy distributors with clip held cap thru 1963
|
IHS5713 Distributor Gasket - USA Made
|
1901737 Spring: Distributor - John Deere Tractors Fits: M, MC, MT, 320, 330, 40, 420, 430
|
ABC011 6 Volt Distributor Coil - Metal housing, mounting bracket included-- fits tractors with barrel-type coil
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC4293 6 Volt Flame Thrower Coil - Use with electronic ignition kits or breaker point ignitions Note: Do not use an external resistor on 6 volt electrical systems
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
ABC6411 Flame-Thrower II Ignition Coil - USA Made
|
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
ABC322 Autolite Spark Plug - 14 MM thread Dia 7/16" reach 13/16" hex Medium heat range Plug gap 0.025" - Fits Ford 8N with side mounted distributors
|
JDS1561 Tailored Spark Plug Wire Set - Original preassembled black cotton covered style with copper core and straight steel terminals. The coil wire measures 14" long, the plug wires measure 11" long.
|
ABC4291 Spark Plug Wiring Set with Straight Boots, 4-cyl. - Use with electronic ignitions
|
EIGN08 Electronic Ignition Conversion Kit - 6 Volt Positive Ground System, w/ Delco Distributor - USA MADE
|
EIGN30 Electronic Ignition Conversion Kit 12 volt negative ground system only - Fits distributors with a clip held cap., Counter Clockwise rotation. - USA MADE
| |