JDS5554 New Distributor - Fits John Deere A, AO, AR, B, G, 50, 60, 70
|
JDS6555 Electronic Distributor
|
JDS6887 Electronic Distributor
|
ABC018 Premium Delco Ignition Tune-Up Kit with Rotor - For use on tractors using Delco-Remy distributors with clip held cap through 1963 Delco Distributors Only
|
JDS268 Ignition Tune-Up Kit - For DELCO distributors only Using 18 MM, 1/2" Reach 7/8" Hex Spark Plugs Kit contains: Rotor, Points, Condenser, (2) Spark Plugs Will NOT fit magneto ignitions.
|
ABC3007 Delco Distributor Shaft Bushing and Shim Kit - has an 0.486" I.D., 0.656" O.D. and 2.867" length. Bushing must be sized to shaft after installation
|
ABC488L Spring Clip And Longer Bracket - Distributor caps use one each of ABC488L & ABC488S FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC488S Spring Clip And Shorter Bracket - Distributor caps use one each of ABC488L & ABC488S - FITS DELCO DISTRIBUTORS ONLY, *** WILL NOT FIT IH OR AUTOLITE BUILT DISTRIBUTORS/MAGNETOS **
|
ABC500 Delco Distributor Terminal Insulator - Square was the late style that fit distributor housings with .300 Dia hole with a keyway, WILL NOT FIT IH BUILT DISTRIBUTORS/MAGNETOS
|
JDS3012 Delco Distributor Bushing And Shim Kit - This bushing and shim kit has an 0.486" I.D., 0.656" O.D. and 1.989" length. Bushing must be sized to shaft after installation.
|
ABC2523 Distributor Hold Down Clamp - Used when converting from Magneto to Delco Distributor
|
ABC3978 Ignition Points Only (for Delco Distributor with Clip Held Cap) - For tractors using Delco-Remy distributors only
|
|
|
ABC520 Delco Rotor Button - Tractors using Delco-Remy distributors with clip held cap through 1963
|
JDS513 Horizontal Distributor Cap - Fits John Deere A, B, D, G, 50, 60, 70 with Delco horizontal distributors with Clip held cap
|
ABC186 Distributor Dust Cover With Felt Gasket And Washer - Fits tractors using Delco-Remy distributors with clip held cap thru 1963
|
IHS5713 Distributor Gasket - USA Made
|
JDS6631 Distributor Gasket - John Deere Tractors Fits: A, B, AO, AR, G Fits John Deere Tractors Fits: (Gas only NOT LP): 50, 60, 70 - USA Made
|
ABC556 Distributor Or Magneto Mounting Gasket - USA Made
|
JDS6033 Spark Plug Wire Holder Bracket - USA MADE
|
ABC348 12 Volt Distributor 'HOT' Coil (55000 Volts)
|
ABC509 12V Coil Internal Resisted - Barrel style Internally resisted Includes coil mounting bracket
|
R3528 12 Volt Flame Thrower Coil - for all 12 volt systems requiring horizontal mounting position - Internally Resisted 3 OHMS.
|
ABC6158 12 Volt Distributor 'HOT' Coil (55000-Volts)
|
|
|
ABC366 2 Terminal Style Universal 12-volt Voltage - 2 terminal style Reduces voltage to distributor points 2.0 OHMS of resistance, Limits voltage to coil when using 12-volt battery.
|
JDS906 Distributor Coil Bracket - Mounts to Fan Shaft - USA Made
|
ABC170 Autolite Spark Plug - 18 mm thread diameter 1/2" reach 7/8" hex Medium hot Std Tip / Resistor Plug gap 0.025"
|
ABC171 Autolite Spark Plug - 18mm thread diameter 1/2" reach 7/8" hex Hot heat range Std Tip / Resistor
|
JDS643 Spark Plug Wiring Set With Copper Wire - These wires are approx. 32 & 49" long, have a copper core with aluminum coating to prevent corrosion and a Neoprene Outer Cover. - USA Made
|