IHS3473 Hydraulic Cylinder Seal Kit
|
|
Item Number: IHS3473
|
IHS3473 Hydraulic Cylinder Seal Kit USA Made Fits The following models with remote 3-1/2" x 8" hydraulic cylinder attachment International / Farmall - H, HV, M, MD, MDV, MV, Super H, Super HV, Super MDTA, Super MDV-TA, Super MTA, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, W9, WD9, WDR9, WR9, WR9S ( with a 3-1/2 x 8 hydraulic cylinder attachment), [ 300, 330, 340, 350, 400, 450, 460, 560 ( with fast hitch or a 3-1/2" x 8" hydraulic remote cylinder) ]; Replaces: 363138R91, 363138R92, 363138R93, 363138R94 Note: Measure cylinder housing O.D. before ordering. Fits cylinders with the following part numbers: 354037R95, 360997R91, 366275R91, 371208R92, 371292R91, 374186R91. Replaces IH kit #'s: 363138R91, 363138R92, 363138R93, 363138R94 & individual part #'s - (1) 350429R1, 238-5114 O-ring
- (1) 352216R1, 519381 O-ring
- (2) 352221R1, 377952R1, 229317, 9672467 O-ring
- (1) 354047R1 O-ring
- (2) 354836R1, 70924840 O-ring
- (1) 360599R1, 86511345 O-ring
- (1) 354048R1 dust seal
- (2) 375936R1 washer
- (2) 371218R1 washer
- (1) 383669R1 washer
- (2) 404015R1 washers
. Also fits the following IH equipment using the IH cylinders listed above: - Tool bar: 82
- Snow blower: 70, 80
- Rotary cutter: 711
- Moldboard plow: 710
- Conser-till plow: 60, 6000
- Vibra chisel: 645
- Chisel plow: 45, 55, 4500, 5500
- Cultivator: 78, 667, 669
- Diskall: 300, 310
- Harrow: 401
- Planter: 56, 58, 66, 400, 500, 800
- Manure spreader: 530, 540, 550, 555
- Flail chopper: 6, 7. 8, 10, 40, 50, 60
- Grain drill: 150, 620, 5100, 6200
- Blade: 200, 300
- Beet harvester: 23, 24, 25
- Forage harvester: 350, 550
> |
IH10 International I & T Shop Service Manual - USA Made - International / Farmall - Fits: 300, [ 300, 350 (Utility) ], 350 (Utility Diesel), [ 350, 400, 450 (Diesel) ], 350, 400, 450, Wheatland: 400, [ 400, 450 (Diesel) ], 450
|
IH25 International IT Shop Manual - USA MADE Fits: International 2606, 460, 560, 606, 660
|
DEC450 International Hydra Touch Handle Decals - USA Made
|
IHS278 Live Hydraulic Pump - 3-7/8" flange to flange - Fits gas & LP only
|
IHS284 Live Hydraulic Pump - 12.6 GPM @ 1450 RPM, 1200 PSI, does not fit Diesels Tractors
|
IHS1240 Hydraulic Pump Flange - 3/4" NPT inlet and outlet --- threaded for hydraulic hose
|
IHS1237 Hydraulic Pump Flange - 3/4" NPT --- Threaded for hydraulic hose
|
IHS3077 Fast Hitch Pin with Ball and Handle - 3/4" O.D. and the length is 4-1/2" long (pin only).
|
IHS3069 Fast Hitch Pin with Ball - 3/4" O.D. and is 2-7/8" long
|
IHS3073 Fast Hitch Lateral Link / Rockshaft Cylinder Pin - 7/8" O.D., is 3-3/16" long (pin only), and is 4-1/2" long (pin with handle)
|
IHS830 Crank Handle For Lift Arm Screw
| |
|
|