IHS555 Torque Generator

IHS555 Torque Generator - 7/8" Shaft diameter (keyed and drilled) 9.475 " overall length     |
|
Item Number: IHS555
|
IHS555 Torque Generator Allis Chalmers - Fits: [ WC, WD, WD45 (Using 7/8" diameter steering shafts) ], WD45 (Diesel Using 7/8" diameter steering shafts) Case - Fits various models Char-Lynn - Replaces: 217-1020 Cockshutt - Fits: [ GOLDEN ARROW, 30, 35, 40, 50, 560, 570 (and other models using 7/8" diameter steering shafts) ], [ Co-Op: E3, E4 (and other models using 7/8" diameter steering shafts) ] International - Fits: H, HV, M, MD, MDV, MTA, MV, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, [ 300, 350, 400, 450 (Rowcrop) ] Fits John Deere - A, AH, AN, ANH, AW, AWH, B, BN, BNH, BW, BW40, BWH, BWH40, G, GH, GM, GN, 50, 520, 60, 620, 70, 70D, 720, 720D Massey Harris - Fits: 33, 333, 44, 44-6, 444, 44 Special Minneapolis Moline - Fits various models Oliver - Fits: Super 66, Super 77, Super 88, 66, 660, 77, 770, 88, 880 Heavy duty. Does not include the IHS673
port block which is sold separately. Torque output at 1000 PSI = 1100 IN LBS. Rated operating pressure = 1000 PSI maximum. Operating speed 3 GPM = 65 RPM Recommended Fluid Input = 3 TO 4 GPM 7/8" Shaft diameter (keyed and drilled) 9.475 " overall length
|
IHS673 Port Block Kit - 2 1/4" C-C MOUNTING BOLT HOLES (5/16" MOUNTING BOLTS). PORT HOLES = 1.064 C-C
|
ABC380 - Slip Fit Coupler For Tractors that need a U-Joint - 3-3/8" Compressed. 3-1/2" Overall length. 7/8" I.D.,
|
IHS740 Power Steering Priority Flow Control Valve - Must be used with open center live hydraulics ONLY, Eliminates the belt driven pump, pulleys & bracket
|
ABC1233 Belt Driven Power Steering Pump - using Eaton belt driven power steering pump
|
ABC1414 Power Steering Pump Port Block With O-Rings - Tractors using Eaton style power steering pump with separate reservoir.
|
ABC1417 Power Steering Pump Pulley - using Eaton Style power steering pump 5" OD x .0675" Bore, 1/8" Keyway, 1/2" Belt Width
|
ABC1419 Power Steering Pump Port Block Bolt - Eaton Style power steering pump with separate reservoir
|
IHS1418 - Belt Driver Power Steering Bracket - bolts to the left side of the engine above the governor, Fits Gas/LP
|
IHS1420 Crankshaft Drive Pulley
|
IHS284 Live Hydraulic Pump - 12.6 GPM @ 1450 RPM, 1200 PSI, Mounting bolt pattern: Top center to center = 3-3/8" Bottom center to center = 2-5/8"
|
IHS1240 Hydraulic Pump Flange - 3/4" NPT inlet and outlet --- threaded for hydraulic hose
|
IHS675 Mounting Bracket - For Torque Generator
|
|
|