JDS538 Clutch Facing
 JDS538 Clutch Facing - 10" OD 6-3/4" ID 0.150" thick JDS538 Clutch Facing JDS538 Clutch Facing JDS538 Clutch Facing |
|
Item Number: JDS538
|
JDS538 Clutch Facing Fits John Deere - A, AO, AR, D (sn 109944 and up), G, GP, 60, 620, 630, 70, 720, 730; Replaces: C614R, R90215 10" OD 6-3/4" ID 0.150" thick, Two used per tractor; sold individually For use with our JDS021 slider disc. |
JDS543 Clutch Pulley Cover - 12" Diameter, Has inward dimple to measure RPM
|
ABC187 Belt Pulley Brake Lining - Non-asbestos lining with countersunk brass rivets
|
JDS1887 Belt Pulley Brake Lining Kit - 2-1/4" wide x 5" long
|
JDS545 Pulley Clutch Disc With Bonded Lining - 0.393" thick
|
JDS1647 Clutch Adjusting Disc - Made from ductile iron. Will not crack under stress like grey iron and has significant tensile strength over the original!
|
JDS020 Clutch Drive Disc - 0.265" thick
|
JDS079 Clutch Drive Disc - 1.895 face to face thickness
|
JDS1599 Clutch Pulley Cover Retaining Spring W/ Rivet - 2.579" Long, 1.040" Width, 0.263" Hole I.D. - USA Made
|
JDS880 Clutch Disc Adjusting Spring - 1.915" long and the wire thickness measures 0.120"
|
JDS882 Clutch Pulley Cover Retaining Spring With Rivet
|
JDS3022 Clutch Pulley Brake Cover Gasket - 10-5/16" long, 2-3/4" wide and has 4 bolt holes
|
JDS887 Clutch Lever Pivot Bolt - 0.750" O.D. to 0.625" O.D., 4-1/4" length
|
MIS1134 Clutch Adjusting Nut - 9/16"-18 NF Grade 5 Zinc, Slotted Hex Nut
|
JDS3846 Clutch Belt Pulley Bushing - 2.257" I.D. 2.569" O.D. 2.500" length
|
JDS1040 Clutch Operating T-Bolt - 9/16" diameter and 6-3/4" overall length.
|
JDS1037 Clutch Operating T-Bolt - 1/2" diameter and 6-3/16" overall length.
|
JDS1048 Clutch Operating T-Bolt - 9/16" diameter and 5-9/16" overall length.
|
JDS2581 Clutch Dog Pin - 0.793" diameter, 2.500" usable length - USA Made
|
JDS3325 Clutch Dog Toggle - 2.200" overall length
|
Price: Low Stock - Call for Avaibility
JDS3372 Clutch Dog Toggle - 1.999" overall length - USA Made
|
JDS867 Clutch Dog - Forged Just Like Original
|
JDS021 John Deere Clutch Slider Disc - 0.247" thick
|
JDS1626 Clutch Pressure Plate Spring Washer - 0.572" ID, 0.937" OD, 0.035" Thick, Steel Spring
|
JDS1902 Oversized Clutch Pin - 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes
|
JDS891 Clutch Lever Pivot, Brake or Pedal Bushing - 0.750" ID, 0.815" OD, 1.373" long
| | |
|
|