FDS2476 Warning Light with PAL Nut 0.875" O.D., 3/4" - 20 NF thread, 0.885" tall. Bulb and socket not included.
|
FDS4303 3 Position Fused Push/Pull Light Switch
|
ABC4279 3 Position Push/Pull Light Switch
|
FDS213 12 Volt Headlight Assembly 5 3/4" light Original sealed beam style NOTE: Stamped "TRACT - O- LITE" on housing.
|
IHS647 12 Volt Sealed Beam Universal Headlight Assembly This lamp assembly is often used with flat top fenders. Takes 4-1/2" (4.5") diameter sealed beam light. Outside bezel diameter is 5-3/16" (5.1875").
|
FDS460 Ford Head Light Ring 5-3/4" outside to outside 1" wide * measure your width before ordering If your light ring (bezel) is 3/4" wide, then please view FDS256
|
FDS494 Head Lite Reinforcement Washer Light GRAY PRIMER --- 2-1/4" O.D. 1/2" CENTER HOLE
|
ABC3447 Rubber Light Bezel 4.750" O.D. 4.100" I.D. 1.940" wide 4 inner tabs 1 outer locating tab Note: Bezel mounts inside the housing, not on the outside.
|
ABC353 12-volt sealed lo-beam Lamp
|
ABC443 12 Volt Sealed Beam Bulb Double Contact --- 5.625 Dia --- 35 Watt
|
ABC544 Round Fender And Cab Mount Warning Light 2 amber lenses Double contact bulb 12 volts Black die cast base 4" lens Diameter 1/2" Diamater stud 2.4" thick at widest point
|
ABC546 Rectangular Fender And Cab Mount Warning Light 2 required per tractor, sold individually
|
ABC548 12 Volt Round Red Tail Light Assembly with Liscense Lamp Window 4" diameter 2 stud mount 1-7/8" center-to-center studs Black ABS plastic base 12 Volt If 6-volt is required, please also purchase ABC1439 bulb.
|
FDS452 Red Plastic Tail Lite Lens 4" OD - 3-1/8" C-C HOLES
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|
ABC4098 LED Fender and Cab Mount Warning Light - 4-1/2" x 4-1/2", Voltage: 10-30 Volt operating range
|
FDS442 Restoration Quality 6 Volt Duolamp Tail Light Assembly Bracket is included. Plastic Lens6 volt bulb ABC344 is installed. Could be changed to a 12 volt bulb, ABC345 (sold separately).
|
FDS454GK Gaskets For Red Tail Lite Lens 3-3/4" OD 3-1/8" C-C HOLES
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole
|
ABC3500 LED Flood Light Assembly W/ Rear Mounting Post 12 Volt 4-1/2" diameter bulb
|
ABC3514 12-Volt LED Flood Light Assembly 4-1/4" chrome die cast with acrylic lens.
|
ABC3474 LED Lamp 12-Volt - Trapezoid, Negative ground, 4-1/2" dia.
|
ABC3490 LED Lamp 12 Volt FloodlightNegative Ground 4-1/2" diameterThe flood beam is an excellent work light that illuminates wide and short areas.
|
ABC3441 12-Volt LED Trapezoid Light Assembly W/ Rear Mounting Post 1/2" rear stud mount 4-1/2" diameter bulb, ideal, general-purpose work light designed with a narrower pattern for longer visibility.
|
ABC3696 LED Lamp With Flood Beam Pattern 5.730" diameter 6 to 30 Volts Polarity sensitive, negative ground only The flood beam is an excellent work light that illuminates wide and short areas. Fits FDS177, FDS192, FDS193, FDS213 light assemblies.
|
ABC3899 LED Flasher Unit 0.230" dia. single bolt
|
ABC5128 Flasher Assembly, 12V
|