|
IHS3313 Rear Tail Light Bracket - 4-1/2" long, .815" O.D.
|
IHS464 Light Clamp For front or rear light --- powder coated red
|
ABC4279 3 Position Push/Pull Light Switch
|
IHS623 4 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS622 3 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS624 3 Position 12 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS625 4 Position Switch Body Only - 12 Volt USA MADE
|
IHS600 6 Volt Rotary Light Switch 3 Position - Fits 100, 130, 200, 230, 330, 300, 400, 350, 450, Wheatland: 400, 450 (all with a Voltage Regulator
|
IHS460 Flat Back Headlight Assembly 6 Volt Restoration Quality - Flatback Headlights were used early 1953 & up; 4-5/8" lens width. Please note this light is only correct for models with 6 volt systems.
|
IHS463 Flat Back Headlight Assembly 12 Volt Restoration Quality. - Flatback Headlights were use early 1953 & UP; 4-5/8" lens width. Please note this light is only correct for models with 12 volt systems.
|
IHS462 Flatback Headlight Gasket - 4-5/8"
|
IHS461 Flat Back Headlight Trim Ring 4-5/8" diameter. This trim ring will fit OEM sealed beam headlights and our IHS460 and IHS463 Headlamp assemblies.
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353R Red Headlight Trim Ring RED FINISH, INTERCHANGEABLE with ORIGINAL LIGHTS.
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
IHS402 6 Volt Sealed Beam Bulb "GUIDE" is cast into the top surface of glass Fits 4-5/8" O.D. flatback `pancake' lights (IHS460 & IHS463) Lamp is 4.375" O.D.
|
ABC1115 12 Volt Red Jewel Lens Also fits original lights with 12 volt systems
|
IHS474 Red Dot Jewel Lens Assembly Fits our OLS073, JDS318V6, JDS319V6, JDS466, JDS475, IHS473 light assemblies and original lights. Has 1 wire lead.
|
IHS952 Lighting Switch Dimmer Resistor - fits all light switches with the dimmer position
|
ABC342 Rear Combo Light Bulb 6 Volt is interchangeable with the original light using a 6 volt system
|
IHS455 12 Volt Rear Combo Light Assembly 4- 3/4" 12 volt rear combo light assembly includes the red jewel lens and rotary switch.
|
IHS473 6 Volt Rear Combo Light Assembly 4-3/4" diameter glass lens 6 volt rear combo light assembly Includes red jewel lens and rotary switch
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|
ABC378 Combination Rear Light Reflector Also fits original lights. Measures 4-1/2" diameter housing (or 4-3/4" over the curve of the lens).
|
IHS475 Light Terminal This terminal assembly will interchange with the original.
|