|
|
IHS3313 Rear Tail Light Bracket - 4-1/2" long, .815" O.D.
|
IHS464 Light Clamp For front or rear light --- powder coated red
|
ABC4279 3 Position Push/Pull Light Switch
|
IHS623 4 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS622 3 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS624 3 Position 12 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS625 4 Position Switch Body Only - 12 Volt USA MADE
|
IHS598 6 Volt Rotary Light Switch 4 Position - Fits Cub, Cub LoBoy, T340, T4, T5, 140, 240, 340
|
IHS599 12 Volt Rotary Light Switch 4 Position 0.670" O.D. thread
|
IHS600 6 Volt Rotary Light Switch 3 Position - Fits 100, 130, 200, 230, 330, 300, 400, 350, 450, Wheatland: 400, 450 (all with a Voltage Regulator
|
IHS601 3 Position 12 Volt Rotary Light Switch 0.670" O.D. thread
|
IHS918 Light Switch Combo With Knob Also fits original lights. 3 screw terminals
|
FDS213 12 Volt Headlight Assembly 5 3/4" light Original sealed beam style NOTE: Stamped "TRACT - O- LITE" on housing.
|
IHS460 Flat Back Headlight Assembly 6 Volt Restoration Quality - Flatback Headlights were used early 1953 & up; 4-5/8" lens width. Please note this light is only correct for models with 6 volt systems.
|
IHS463 Flat Back Headlight Assembly 12 Volt Restoration Quality. - Flatback Headlights were use early 1953 & UP; 4-5/8" lens width. Please note this light is only correct for models with 12 volt systems.
|
IHS462 Flatback Headlight Gasket - 4-5/8"
|
IHS461 Flat Back Headlight Trim Ring 4-5/8" diameter. This trim ring will fit OEM sealed beam headlights and our IHS460 and IHS463 Headlamp assemblies.
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353R Red Headlight Trim Ring RED FINISH, INTERCHANGEABLE with ORIGINAL LIGHTS.
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
JDS676 Clamp Ring With Screw .885" wide
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
ABC443 12 Volt Sealed Beam Bulb Double Contact --- 5.625 Dia --- 35 Watt
|
ABC450 Sealed Beam Bulb 6 Volt Double Contact 5.625 Dia. 30 Watt
|
IHS402 6 Volt Sealed Beam Bulb "GUIDE" is cast into the top surface of glass Fits 4-5/8" O.D. flatback `pancake' lights (IHS460 & IHS463) Lamp is 4.375" O.D.
|
IHS403 12 Volt Sealed Beam Bulb "GUIDE" is cast into the top surface of glass Fits 4-5/8" O.D. flatback `pancake' light Lamp is 4.375" O.D. Restoration Quality.
|