Lights & Parts
|
|
IHS414 Left Hand Forged Light Bracket Forged. New and improved! 8-3/4" overall length
|
IHS415 Right Hand Forged Light Bracket Forged New and improved! 3-3/4" overall length
|
IHS734 Tail Light Bracket Set Screw Hex Jam Nut Only SET SCREW: 3/8 X 1" NC CUP POINT --- HEX JAM NUT: 3/8" NC 8
|
IHS735 Rear Light Bracket Assembly Includes post (IHS415), bracket, set screw and jam nut (IHS734). 1-3/4" C-C bolt pattern
|
ABC4279 3 Position Push/Pull Light Switch
|
IHS623 4 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS622 3 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS624 3 Position 12 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS625 4 Position Switch Body Only - 12 Volt USA MADE
|
IHS1636 Rotary 4 Position Light Switch For models with 6 Volt, CUT OUT relay, NOT voltage regulator.
|
IHS593 6 Volt Rotary Light Switch 4 Position
|
IHS594 12 Volt Rotary Light Switch 4 Position
|
IHS595 6 Volt Rotary Light Switch 3 Position - Fits A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, [Super A, AV, C, H, HV, M, MD, MDV, MV, W4, W6,] W4, W6, W9, WD6, WD9, WDR9, WR9 (WITH switch on taillight & Regulator)
|
IHS596 12 Volt 3 Position Rotary Light Switch - Fits A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, [Super A, AV, C, H, HV, M, MD, MDV, MV, W4, W6,] W4, W6, W9, WD6, WD9, WDR9, WR9 (WITH switch on taillight & Regulator)
|
IHS918 Light Switch Combo With Knob Also fits original lights. 3 screw terminals
|
IHS351R Complete Headlight Assembly his 6 volt lamp assembly is 4-3/4" in diameter and arrives with a beautiful red powder coat finish. ** Threaded Stud Length = 2-1/2" **
|
IHS351R12V Complete Headlight Assembly This headlight assembly measures 4-3/4" Powder coated red 12 volt bulb Threaded stud length: 2-1/2"
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353R Red Headlight Trim Ring RED FINISH, INTERCHANGEABLE with ORIGINAL LIGHTS.
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
IHS354 6 Volt Light Bulb 6 Volt Single contact base 24 Watt Interchangeable with original Fits as a headlight or a rear combo light bulb
|
IHS436 12 Volt Light Bulb INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB
|
ABC3857 LED Light Bulb Works for 12 volt systems
|
ABC1115 12 Volt Red Jewel Lens Also fits original lights with 12 volt systems
|
IHS2432 Light Switch Dimmer Resister - For tractors when equipped with a 12 volt system.
|
|
|