ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
ABC4279 3 Position Push/Pull Light Switch
|
ABC527 Concave Light Mounting Washer / Retainer 2-1/4" OD. 9/16" Center hole. Metal.
|
JDS606 12 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length Depending on your application you may install this tractor light as either a front or rear light.
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353B Headlight Ring BLACK FINISH --- INTERCHANGEABLE WITH ORIGINAL
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
JDS1007 John Deere 50, 60 Front Light Bracket - Threaded end with jam nut, 10-1/8" Long
|
JDS676 Clamp Ring With Screw .885" wide
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
IHS354 6 Volt Light Bulb 6 Volt
Single contact base
24 Watt
Interchangeable with original
Fits as a headlight or a rear combo light bulb
|
IHS436 12 Volt Light Bulb INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB
|
ABC3857 LED Light Bulb Works for both 6 volt and 12 volt sytems
|
JDS499 Dash Light With 12 Volt Bulb This light includes a 12 volt bulb.
|
JDS588 Dash Light Cover FITS JDS495 & JDS499---1" DIAMETER -- BLACK---1 " LENGTH
|
JDS588CH Chrome Dash Light Cover 1" DIAMETER --- CHROME; 1" LENGTH
|
JDS589 Black Dash Light Cover Fits JDS648V6, JDS648V12, & JDS746 Dash Lights---BLACK --- 1-1/4" DIAMETER---1.185" Length
|
JDS589CH Chrome Dash Light Cover Fits JDS648V6, JDS648V12, & JDS746 Dash Lights--1-1/4" DIAMETER --- 1.185" Length--- CHROME
|
JDS648V12 12 Volt Dash Light Assembly Cap measures 1.333" held on with 2 screws post diameter measures 0.625" outside
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|
ABC4098 LED Fender and Cab Mount Warning Light - 4-1/2" x 4-1/2", Voltage: 10-30 Volt operating range
|
IHS475 Light Terminal This terminal assembly will interchange with the original.
|
JDS318V12 12 Volt Rear Combo Red Dot Lamp Assembly - The post comes out of the back of the lamp and installs into the back of seat and is used on models where the combo lamp switch is on your dash (the switch is NOT located on the lamp - 4 3/4" Diameter
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole
|
ABC3899 LED Flasher Unit 0.230" dia. single bolt
| |