ABC4279 3 Position Push/Pull Light Switch
|
ABC536 Combo Light Switch Knob
|
ABC525 12-Volt Sealed Beam Light Assembly 4.5" Dia 1-1/8" Stud length Includes high beam bulb For low beam, order ABC353 bulb
|
ABC527 Concave Light Mounting Washer / Retainer 2-1/4" OD. 9/16" Center hole. Metal.
|
JDS581 12 Volt Lo Beam Sealed Beam Head Lamp Assembly 4.5" Diameter. Also used as a taillight on 1949 & up models.
|
JDS582 12 Volt Hi Beam Sealed Beam Head Lamp Assembly 4.5" Diameter. Also used as a taillight on 1949 & up models.
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
ABC3028 Rubber Light Bezel Without Guard This bezel has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353B Headlight Ring BLACK FINISH --- INTERCHANGEABLE WITH ORIGINAL
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
|
JDS676 Clamp Ring With Screw .885" wide
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC353 12-volt sealed lo-beam Lamp
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
ABC460 12-volt Sealed Hi-Beam Lamp Double Contact 35 Watt 4.365" O.D.
|
IHS354 6 Volt Light Bulb 6 Volt Single contact base 24 WattInterchangeable with originalFits as a headlight or a rear combo light bulb
|
IHS436 12 Volt Light Bulb INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB
|
ABC3857 LED Light Bulb Works for both 6 volt and 12 volt sytems
|
JDS589 Black Dash Light Cover Fits JDS648V6, JDS648V12, & JDS746 Dash Lights---BLACK --- 1-1/4" DIAMETER---1.185" Length
|
JDS589CH Chrome Dash Light Cover Fits JDS648V6, JDS648V12, & JDS746 Dash Lights--1-1/4" DIAMETER --- 1.185" Length--- CHROME
|
JDS648V12 12 Volt Dash Light Assembly Cap measures 1.333" held on with 2 screws post diameter measures 0.625" outside
|
JDS746 Black 12 Volt Dash Light
|
ABC548 12 Volt Round Red Tail Light Assembly with Liscense Lamp Window 4" diameter 2 stud mount 1-7/8" center-to-center studs Black ABS plastic base 12 Volt If 6-volt is required, please also purchase ABC1439 bulb.
|
JDS3271 12 Volt Outer Fender Light With Rubber Bezel 4-1/2" diameter sealed beam, 4.775" O.D. rubber bezel, 1 terminal for wire and threaded post out rear of housing.
|
JDS3015 Inner Fender Light with Rubber Bezel 12 Volt 4-1/2" diameter sealed beam, 4.775" O.D. rubber bezel, 1 terminal for wire and threaded post out rear of housing.
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|