ABC536 Combo Light Switch Knob
|
JDS885 Combination Light Switch For use on tractors with 2 head lights, 24 Volt electric start only, 8 Spade terminals
|
ABC525 12-Volt Sealed Beam Light Assembly 4.5" Dia 1-1/8" Stud length Includes high beam bulb For low beam, order ABC353 bulb
|
ABC527 Concave Light Mounting Washer / Retainer 2-1/4" OD. 9/16" Center hole. Metal.
|
JDS580 6 Volt Hi Beam Sealed Beam Head Lamp Assembly 4.5" Diameter. Also used as a taillight on 1949 & up models.
|
JDS581 12 Volt Lo Beam Sealed Beam Head Lamp Assembly 4.5" Diameter. Also used as a taillight on 1949 & up models.
|
JDS582 12 Volt Hi Beam Sealed Beam Head Lamp Assembly 4.5" Diameter. Also used as a taillight on 1949 & up models.
|
JDS603 6 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length--- CAN BE INSTALLED ON FRONT OR REAR --- BLACK, BULLET STYLE-
|
JDS606 12 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length Depending on your application you may install this tractor light as either a front or rear light.
|
JDS579 6 Volt Lo Beam Sealed Beam Head Lamp Assembly
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
ABC3028 Rubber Light Bezel Without Guard This bezel has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353B Headlight Ring BLACK FINISH --- INTERCHANGEABLE WITH ORIGINAL
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
JDS1007 John Deere 50, 60 Front Light Bracket - Threaded end with jam nut, 10-1/8" Long
|
JDS676 Clamp Ring With Screw .885" wide
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC352 6 Volt Sealed Beam Bulb 30 Watt Double Contact 4.5" Dia LO beam Interchangeable with original
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC353 12-volt sealed lo-beam Lamp
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
ABC460 12-volt Sealed Hi-Beam Lamp Double Contact 35 Watt 4.365" O.D.
|
ABC462 6-volt Sealed Hi-Beam Bulb Double Contact --- 25 Watt dimensions= 4.365 O.D.
|
IHS354 6 Volt Light Bulb 6 Volt Single contact base 24 WattInterchangeable with originalFits as a headlight or a rear combo light bulb
|
IHS436 12 Volt Light Bulb INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB
|
ABC3857 LED Light Bulb Works for both 6 volt and 12 volt sytems
|
ABC2934 Indicator Light This indicator light is 12-Volt (bright enough for 6-Volt also), has 2 wire leads, a 1.825" total stem length, 15/16" jewel lens, and 0.871" housing OD to fit 0.875" dash opening.
|
IHS474 Red Dot Jewel Lens Assembly Fits our OLS073, JDS318V6, JDS319V6, JDS466, JDS475, IHS473 light assemblies and original lights. Has 1 wire lead.
|