ABC4279 3 Position Push/Pull Light Switch
|
ABC425 Knob For Light Switch Says: "Lights"Thread size: 10-32
|
ABC536 Combo Light Switch Knob
|
ABC541 Combo Light Switch Assembly with Knob 3 screw terminals
|
ACS139 Light Switch 3 Position Hi charge with lights Note: Switch manufacturers consider OFF as 1 position 0.800" diameter thread end, 10-32 thread Three screw type terminals
|
JDS1030 Light Switch Knob - #10"-32 UNF threads
|
ABC312 7 inch Headlight Ring
|
ABC307 Flat Headlight Lens 7 Inches Measures 6-3/4" diameter Glass
|
ABC527 Concave Light Mounting Washer / Retainer 2-1/4" OD. 9/16" Center hole. Metal.
|
IHS351B Complete Headlight Assembly 4-3/4" --- BLACK --- BULLET STYLE --- ALSO WORKS AS A REAR WORK LIGHT ON SOME MODELS.***Threaded Stud Length = 2 1/2"
|
IHS351B12V Complete 12 Volt Headlight Assembly 4-3/4" bulb style Threaded stud length: 2-1/2"
|
JDS603 6 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length--- CAN BE INSTALLED ON FRONT OR REAR --- BLACK, BULLET STYLE-
|
JDS606 12 Volt Complete Headlight Assembly 4-3/4" Curved lens; 1-1/2" stud length Depending on your application you may install this tractor light as either a front or rear light.
|
ABC336 6 VOLT Headlight Assembly With Flat Lens This light uses different bulbs (IHS354 6 Volt or IHS436 12 Volt) than the USED OEM light assembly
|
ABC347 - 7 Inch Headlight Gasket For 7" diameter lense
|
ABC560 Headlight Rubber Gasket (Modern version of IHS355 --- Black rubber --- This gasket is one continuous piece (No staples), therefore it will seal better than the original style)
|
ABC320 Headlight Reflector This reflector is Interchangeable with your original and measures 4 1/2" or 4 3/4", depending on how you measure (directly across the top of the housing, or over the curve of the lense.)
|
IHS352 Curved Lens With Guide Name "GUIDE" DISPLAYS NEAR BOTTOM OF LENS --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE
|
IHS353B Headlight Ring BLACK FINISH --- INTERCHANGEABLE WITH ORIGINAL
|
IHS355 Headlight Gasket BLACK RUBBER, LIKE ORIGINAL WITH STAPLE --- FOR USE IN 4-3/4" DIAMETER LIGHT ASSEMBLY
|
JDS1009 Front Light Bracket - threaded end with jam nut, 13-1/4" long
|
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC345 Dash and Tail Light 12 Volt Bulb Fits bullet style tail lights ACS264V12, OLS070, ACS099 --- Single contact style--- Also fits IH shift quadrant light, #IHS841--- &--- Dash Lights JDS499, JDS648V12, JDS746
|
ABC344 6 Volt Tail Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC343 12 Volt Rear Combo Light Bulb is interchangeable with the original light using a 12 volt system --- 12-V, 12 amp, 1.73 watt Miniature Bayonet Base ---
|
ABC358 6-V Bulb 6 Volt And Double Contact Bulb Fits OEM 5-3/4" & 7" 6-Volt headlamps
|
ABC359 12-V Bulb Double Contact Bulb Fits OEM 5-3/4" & 7" 6-Volt headlamps
|
ABC388 4-3/4 smooth glass Lens with Guide name
|
IHS354 6 Volt Light Bulb 6 Volt Single contact base 24 WattInterchangeable with originalFits as a headlight or a rear combo light bulb
|