|
|
JDS1286 Rear Light Adjusting Arm J
|
JDS1280 Rear Light Rod Bracket
|
JDS469 Light Bracket / Clamp is yellow zinc plated, NOT powder coated green
|
JDS620 Light Support Bracket 2.175" LENGTH TO HEAD --- 2.375" OVERALL INCLUDING HEAD --- 0.400" DIAMETER
|
JDS621 Light Arm - USA Made
|
JDS804 Set Screw & Nut 5/16" hex jam nut - 5/16" - 18 UNC X 1" set screw
|
ABC4279 3 Position Push/Pull Light Switch
|
IHS351B Complete Headlight Assembly 4-3/4" --- BLACK --- BULLET STYLE --- ALSO WORKS AS A REAR WORK LIGHT ON SOME MODELS.***Threaded Stud Length = 2 1/2"
|
IHS351B12V Complete 12 Volt Headlight Assembly 4-3/4" bulb style Threaded stud length: 2-1/2"
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ACS123 Red Glass Tail Light Lens ACS264V6, ACS264V12 & ACS099 tail lights are interchangeable with the original --- Any AC with bullet style tail light
|
ACS264V12 12 Volt Tail Light Taillight will fit any Allis Chalmers tractor as well as other brands that are using a bullet-style tail light with a 2-1/8" OD lens. This light assembly includes the red glass lens
|
ACS264V6 6 Volt Tail Light Will fit Allis Chalmers and others with bullet-style tail light and 2-1/8" O.D. lens Restoration quality 6-Volt bulb included Red glass lens Includes base gasket
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|
ABC4098 LED Fender and Cab Mount Warning Light - 4-1/2" x 4-1/2", Voltage: 10-30 Volt operating range
|
ABC1979 Tail Light Base Gasket
|
JDS1298 Rear Light Mounting Arm - USA Made
|
OLS072 Tail Light Gasket RUBBER GASKET - INTERCHANGEABLE WITH THE ORIGINAL CORK GASKET
|
OLS071 Tail Light Trim Ring Dimensions = 2.292" O.D & 1.640" I.D.
|
ABC3899 LED Flasher Unit 0.230" dia. single bolt
|
IHS950 Field Resistor On Light Switch - for the listed models with a cut out relay on the generator. The resistor is not used on tractors with voltage regulators.
| | |