|
|
JDS6168 Indicator Lamp Lens
|
JDS947 Light Mounting Clamp Half 2 required per light This light mounting half clamp is used with our JDS953 and R43662 bracket our JDS3509 light mounting bracket.
|
JDS953 Light Mounting Bracket 2 required per light This light mounting half clamp is used with T19178 bracket our JDS953 and R43662 bracket our JDS3509 light mounting bracket.
|
JDS3509 Flood Lamp Mounting Bracket With Mounting Bolt 2.500" overall length
|
JDS1971 Front Right Fender Light Panel - For Tractors W/ Sound Guard Body Or Open Station
|
JDS1969 Rear Right Fender Tail Light Panel - For Sound Guard Body Or Open Station
|
JDS1975 Front Left Fender Light Panel - For Tractors With Sound Guard Body Or Open Station
|
JDS1973 Rear Left Fender Tail Light Panel - For Sound Guard Body Or Open Station
|
ABC4279 3 Position Push/Pull Light Switch
|
|
JDS844 4 Position Light Switch This is a genuine Cole Hersee switch. They are the OEM manufacturer. This switch has 6 spade terminals and a 5/8" - 32 UN threaded stem.
|
|
|
JDS859 4 Position Light Switch - 9 spade terminals, 1/2" diameter threaded end
|
IHS647 12 Volt Sealed Beam Universal Headlight Assembly This lamp assembly is often used with flat top fenders. Takes 4-1/2" (4.5") diameter sealed beam light. Outside bezel diameter is 5-3/16" (5.1875").
|
ABC3032 Rubber Light Bezel This light bezel can be used as a front, rear or both light bezel when using a guide style light. 4.960" O.D. 3.250" I.D. 1.325" wide 4 inner slots
|
ABC3044 Rubber Guide Headlight Visor This light bezel can also replace other guide bezels when glare guard hooded bezel is desired.
|
ABC3028 Rubber Light Bezel Without Guard This bezel has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam
|
ABC1439 6 Volt Light Bulb For models listed that take a double element, double contact base
|
ABC353 12-volt sealed lo-beam Lamp
|
ABC460 12-volt Sealed Hi-Beam Lamp Double Contact 35 Watt 4.365" O.D.
|
ABC544 Round Fender And Cab Mount Warning Light 2 amber lenses Double contact bulb 12 volts Black die cast base 4" lens Diameter 1/2" Diameter stud 2.4" thick at widest point
|
ABC546 Rectangular Fender And Cab Mount Warning Light 2 required per tractor, sold individually
|
ABC548 12 Volt Round Red Tail Light Assembly with License Lamp Window 4" diameter 2 stud mount 1-7/8" center-to-center studs Black ABS plastic base 12 Volt If 6-volt is required, please also purchase ABC1439 bulb.
|
ABC3796 LED Tail/Warning Light with Red Lens
|
IHS899 12-volt Sealed-Beam Combination Rear Lamp - 4-1/2" dia. combo lamp (used with small separate bulb) Double contact
|
JDS3271 12 Volt Outer Fender Light With Rubber Bezel 4-1/2" diameter sealed beam, 4.775" O.D. rubber bezel, 1 terminal for wire and threaded post out rear of housing.
|
JDS3015 Inner Fender Light with Rubber Bezel 12 Volt 4-1/2" diameter sealed beam, 4.775" O.D. rubber bezel, 1 terminal for wire and threaded post out rear of housing.
|
JDS3008 12 Volt Rear Combo Light Hobbs Style 4-1/2" diameter sealed beam 5.275" O.D. rubber bezel 2 terminals on the rear light housing threaded post out the bottom of the housing
|
ABC3538 12-Volt LED Fender and Cab Warning Light
|