JDS938 Pre-Screener Clip and Spring Kit
 JDS938 Pre-Screener Clip and Spring Kit |
|
Item Number: JDS938
|
JDS938 Pre-Screener Clip and Spring Kit Allis Chalmers - Fits various models Case - Fits various models Cockshutt - Fits: 1550, 1555, 1600, 1650, 1655, 1750, [ 1755, 1855 (Gas) ], 1800, 1900 (Diesel), 1950, 1950T (with 2 precleaner caps), 880; Replaces: 101584A, 101585A International / Farmall - Fits: 504, 544, 560, 606, 660; Replaces: 353639R1, 353758R1 Fits John Deere - 520, 530, 620, 630, 720, 730; Replaces: (spring): R21644R, (clip): R21645R Minneapolis Moline - Fits: G955 Oliver - Fits: [ Super 77, 1550, 1555, 1600, 1655, 1750, 1800, 1850, 1900, 1955, 660, 880, 950 (Some) ], [ 1755, 1855 (SOME, GAS ONLY) ], 1950T (SOME, (sn 194080 - 218229), ONLY WHEN 2 PRECLEANER CAPS ARE USED), 77; Replaces: 101584A, 101585A White - Fits: [ White: 2-135, 2-155 (SOME) ] For JDS535 Screen --POWDER COAT GREEN |
ABC003 Vented Fuel Tank Cap - 2.780" O.D., 1.780" tab to tab overall length, .250" Tab width, Includes gasket
|
ABC1221 Gasket fits AC and Case Fuel Cap, or IH and JD Fuel Strainers - 2.242" I.D., 2.948" O.D., rubberized cork - USA Made
|
ABC1880 Top Vented Fuel Cap - 2-11/16" I.D., 1.500" height (including splash guard), 1.118" height (cap only)
|
ACS336 Fuel Cap - 3.475" O.D., 2.505" tang to tang length, includes gasket
|
CKS119 Fuel Cap - 3-1/2" O.D.; 2-1/2" tang to tang length, 2.20" center I.D., includes gasket, vented thru top of cap
|
CKS117 Fuel or Oil Fill Cap - 2.25" I.D., 1.80" tang to tang length, 2.37" O.D., includes gasket, Like Original!
|
IHS226 Side Vented Fuel Cap - 2-11/16" I.D., 5/8" height, 2.886" O.D., 1.825" inside center dia., 2.103" tang-to-tang length, 0.398" tang width
|
IHS338 Cap - 1-3/8" tang to tang length, 0.345" tang width, 1.865" O.D., 1.75" inside center dia., includes gasket
|
JDS416 Fuel Cap - used on John Deere until approx. 1941-1942
|
JDS729 Fuel Cap - 4.040" red cover O.D., 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center dia. 1.375" tall
|
MHS043 Fuel Cap with Gasket - 2 7/8" O.D., 1/4" High, Zinc Finish, can be painted if needed, 1 3/4" tang to tang length, Vented, Includes Gasket,
|
ACS172 Radiator or Fuel Cap
|
IHS239 Fuel and Radiator Cap Gasket- 2.563" O.D., 1.875" I.D., 0.125" thick
|
MHS045 Radiator Cap, Fuel Cap - 1.761 tang to tang length, 2.710" I.D., .399" tang width, The tang is from the center of the cap out.
|
ACS208 HOSE 1-5/8" O.D. - Fits Allis B, C, CA, G, D10, D12, D14, RC; Fits Massey Harris Pony
|
FDS261 Radiator/Air Cleaner Hose - 2" I.D., 2.25" long
|
ABC002 Sediment Bowl Assembly - Includes shallow bowl (1.280" tall) w/ 3/8" pipe inlet, & (2) 1/8" pipe outlets
|
ABC092 Gas Fuel Strainer Assembly - 3/8" pipe inlet, 1/8" pipe outlet, includes a 5/16" line compression adaptor fitting, 1.280" bowl length
|
ABC281 Sediment Bowl - 3/8" pipe inlet and 1/8" pipe outlet, 5/16" line compression adaptor fitting, 2.315 Tall Glass bowl
|
ACS326 Sediment Bowl Assembly - includes horizontal inlet and outlet (side inlet & outlet, 1/8" x 1/8" female pipe thread), 3.269 overall length
|
JDS1983 Sediment Bowl Assembly - Fits John Deere - A (SN: 584000 & up Gas), B (SN: 201000 & up Gas), [ 50, 520, 530, 60, 620, 630, 70 (Gas) ] - Automatic Shut Off, these are made using our USA Viton O-ring
|
ABC123 Sediment Glass Bowl Only - 2" O.D., 1.280" Tall
|
ABC124 Sediment Glass Bowl Only - 2.315 Length, 2-1/8" O.D.
|
ABC1315 Sediment Bowl Fuel Tank Screen - 2.530 overall length, .216" Pipe O.D. (where it slides into the sediment bowl), .375" Screen O.D. - USA Made
|
ABC039 Sediment Bowl Gasket - Fits 1.280 tall glass bowl, 2" O.D. Bowl to body - USA Made
|
ABC236 Fuel Filter Bail Assembly With Brass Nut
|
ABC229 Sediment Bowl Screen - 2" Dia., 3/8" dia. center hole, Brass
|
ABC534 Sediment Bowl Screen - 1.839 O.D., 3/8" center hole dia.
|
ABC563 Bail Assembly With Nut - 1.280" tall glass bowl
|
IHS1578 Fuel Strainer / Water Trap Bail - 5" Tall and 3-1/8" Wide
|
|
|