Switches
ABC065 Ignition Switch, Key Switch
|
IHS6223 Starting Switch Gasket - USA Made
|
ABC012 Starter Switch for Delco Starters Manual foot / lever switch --- Saddle mount --- 2 Mounting holes, 0.190" ID, 1-3/8" centers --- --- 3/8" - 16 Threaded battery terminal
|
IHS1247 Starter Switch Pull Rod - 23-3/8" Length --- 1/4" Diameter
|
IHS440 Starting Switch Lever
|
MFS140 Starter Switch This switch measures 1" from the top of the mounting plate to the end of the button. The measurement between bolt holes (center to center) is 1-3/4".
|
MIS065 Battery Disconnect Switch - Can also be used to stop battery drain on a tractor in storage. USA MADE
|
ABC3208 Neutral Starting Switch USA MADE
|
KEY05 Ignition Key Verify key style before ordering, as more than one style could be used
|
ABC400 Ignition Key Switch - For battery ignition only, 3/4" Dia thread, 4 terminals --- 4 position switch, has 4 stud terminals --- Includes 2 keys
|
IHS1107 Ignition Switch with One Key Includes 1 Key, 2 Nuts, and 1 Lock washer. Designed for 0.800"-hole diameter USA MADE
|
IHS760 Ignition Key Switch 2 spade terminals. For use in 0.800" diameter hole. USA MADE
|
ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
JDS631 3 Position Fused Starter and Light Switch - Only fit models that use a voltage regulator. 15 amps and has 5 terminals, knob 10-24 NC threads. The threaded stem measures 7/16 - 20 UNF.
|
IHS623 4 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS622 3 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS624 3 Position 12 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS625 4 Position Switch Body Only - 12 Volt USA MADE
|
ABC233 Universal 2 Terminal Switch Can be used as Universal 2 Terminal Starter Switch | Ether Switch | Horn Button | Manifold Preheat Switch. Mounting stem measures 5/8" 32 thread, 21/32" long.
|
IHS381 Push / Pull 1-Prong Ignition Switch This switch has 1 screw type terminal. It is designed for models with a magneto ignition. The threaded stem measures 9/16 - 18 UNF.
|
IHS382 Push - Pull 2 Position Ignition Switch This switch is for listed models with a battery ignition. The switch has 2 screw type terminals. The threaded stem measures 9/16" - 18 UNF
|
IHS383 Push/Pull Switch Knob 10-32" THREAD
|
IHS590 Rear Combo Light Switch Knob Also fits original lights. This knob measures 0.250" inside diameter and 0.880" outside diameter. Our light switch knob includes a metal insert for a nice tight fit
|
IHS598 6 Volt Rotary Light Switch 4 Position - Fits Cub, Cub LoBoy, T340, T4, T5, 140, 240, 340
|
IHS602 New Style Rotary Light Switch Knob FOR ROTARY LIGHT SWITCHES --- ARROW DESIGN --- OEM MANUFACTURE
|
IHS788 4 Position Rotary Light Switch O.E.M. - Fits Cub, Cub Loboy, T340, TD340, 1206, 140, 154, 184, 185, 2424, 2444, 2500A, 574, 3414, 3444, 3514, 354, 3600, 3616, 3800, 3850, 404, 4100, 4156, 424, 444, 454, 464, 504, 606, 674, 706, 806 USA MADE
|
IHS918 Light Switch Combo With Knob Also fits original lights. 3 screw terminals
|
IHS3234 OEM 12-Volt Rotary Light Switch - 6 spade terminals, 0.685" O.D. thread USA MADE
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole - USA Made
| |
|
|