Switches
ABC065 Ignition Switch, Key Switch
|
ABC6161 Magneto Push-Pull Ignition Switch
|
IHS6223 Starting Switch Gasket - USA Made
|
MFS140 Starter Switch This switch measures 1" from the top of the mounting plate to the end of the button. The measurement between bolt holes (center to center) is 1-3/4".
|
MIS065 Battery Disconnect Switch - Can also be used to stop battery drain on a tractor in storage. USA MADE
|
ABC012 Starter Switch for Delco Starters Manual foot / lever switch --- Saddle mount --- 2 Mounting holes, 0.190" ID, 1-3/8" centers --- --- 3/8" - 16 Threaded battery terminal
|
KEY05 Ignition Key Verify key style before ordering, as more than one style could be used
|
ABC400 Ignition Key Switch - For battery ignition only, 3/4" Dia thread, 4 terminals --- 4 position switch, has 4 stud terminals --- Includes 2 keys
|
IHS1107 Ignition Switch with One Key Includes 1 Key, 2 Nuts, and 1 Lock washer. Designed for 0.800"-hole diameter USA MADE
|
IHS760 Ignition Key Switch 2 spade terminals. For use in 0.800" diameter hole. USA MADE
|
ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
JDS631 3 Position Fused Starter and Light Switch - Only fit models that use a voltage regulator. 15 amps and has 5 terminals, knob 10-24 NC threads. The threaded stem measures 7/16 - 20 UNF.
|
IHS623 4 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS622 3 Position 6 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS624 3 Position 12 Volt Rotary Light Switch (OEM) - USA MADE
|
IHS625 4 Position Switch Body Only - 12 Volt USA MADE
|
ABC233 Universal 2 Terminal Switch Can be used as Universal 2 Terminal Starter Switch | Ether Switch | Horn Button | Manifold Preheat Switch. Mounting stem measures 5/8" 32 thread, 21/32" long.
|
ABC3208 Neutral Starting Switch USA MADE
|
ABC489 Magneto Push Pull Switch This switch has 1 screw type terminal. This switch will fit most models with a magneto ignition. The threaded stem measures 3/8 - 32 UNEF.
|
IHS381 Push / Pull 1-Prong Ignition Switch This switch has 1 screw type terminal. It is designed for models with a magneto ignition. The threaded stem measures 9/16 - 18 UNF.
|
IHS382 Push - Pull 2 Position Ignition Switch This switch is for listed models with a battery ignition. The switch has 2 screw type terminals. The threaded stem measures 9/16" - 18 UNF
|
IHS383 Push/Pull Switch Knob 10-32" THREAD
|
IHS1636 Rotary 4 Position Light Switch For models with 6 Volt, CUT OUT relay, NOT voltage regulator.
|
IHS579 Old Style Light Switch Knob Zinc plated Die cast zinc This is the knob only for the rotary light switches. This will interchange with the original equipment.
|
IHS590 Rear Combo Light Switch Knob Also fits original lights. This knob measures 0.250" inside diameter and 0.880" outside diameter. Our light switch knob includes a metal insert for a nice tight fit
|
IHS593 6 Volt Rotary Light Switch 4 Position
|
IHS594 12 Volt Rotary Light Switch 4 Position
|
IHS595 6 Volt Rotary Light Switch 3 Position - Fits A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, [Super A, AV, C, H, HV, M, MD, MDV, MV, W4, W6,] W4, W6, W9, WD6, WD9, WDR9, WR9 (WITH switch on taillight & Regulator)
|
IHS596 12 Volt 3 Position Rotary Light Switch - Fits A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, [Super A, AV, C, H, HV, M, MD, MDV, MV, W4, W6,] W4, W6, W9, WD6, WD9, WDR9, WR9 (WITH switch on taillight & Regulator)
|
IHS598 6 Volt Rotary Light Switch 4 Position - Fits Cub, Cub LoBoy, T340, T4, T5, 140, 240, 340
|
|
|