ABC065 Ignition Switch, Key Switch
|
MFS140 Starter Switch This switch measures 1" from the top of the mounting plate to the end of the button. The measurement between bolt holes (center to center) is 1-3/4".
|
MIS065 Battery Disconnect Switch - Can also be used to stop battery drain on a tractor in storage. USA MADE
|
ABC3272 Ignition Key Switch With Keys There is a total of 6 spade terminals on this 4-position (on heat start) switch; 2 of the spades are 0.375" wide and 4 of the spades are 0.250" wide. The threaded end is 0.625".
|
ABC4301 Ignition Key Switch w/ 2 Keys & Mounting Nut
|
KEY01 Ignition Key Verify key style before ordering, as more than one style could be used
|
KEY02 Ignition Key Verify key style before ordering, as more than one style could be used
|
KEY1094 Ignition Key (OEM) Verify key style before ordering, as more than one style could be used
|
ABC400 Ignition Key Switch - For battery ignition only, 3/4" Dia thread, 4 terminals --- 4 position switch, has 4 stud terminals --- Includes 2 keys
|
|
ACS288 Ignition Key Switch Can replace the 4 terminal switch. has 2 battery terminals. 5 SPADE TERMINALS .995" DIA THREADED END. OEM STYLE DELCO REMY. INCLUDES JAM NUT, 2 KEYS.
|
IHS760 Ignition Key Switch 2 spade terminals. For use in 0.800" diameter hole. USA MADE
|
CKS111 Ignition Key Switch With Keys - 3 posts with 4 screw type terminals and includes 2 keys The threaded stem measures 9/16 - 24 UNEF USA MADE
|
CKS113 Ignition Switch with Keys This switch has 4 spades with 5 screw type terminals. It is a 4-position switch. Two keys are included. The threaded stem measures 9/16 - 24 UNEF USA MADE
|
ABC398 Universal 2 Position Push Pull Ignition and Light Switch The knob measures 10-24 NC thread pitch. The threaded stem measures 3/8 - 24 UNF.
|
JDS631 3 Position Fused Starter and Light Switch - Only fit models that use a voltage regulator. 15 amps and has 5 terminals, knob 10-24 NC threads. The threaded stem measures 7/16 - 20 UNF.
|
ABC066 Manual Starter Switch Base mount for 7/8" hole 1-3/4" c-c mounting holes Works on 6 and 12 volt tractors
|
ABC367 3 Position Switch Knob 10-32 thread 3 screw type terminals --- Plain face, black
|
ABC489 Magneto Push Pull Switch This switch has 1 screw type terminal. This switch will fit most models with a magneto ignition. The threaded stem measures 3/8 - 32 UNEF.
|
ABC425 Knob For Light Switch Says: "Lights "Thread size: 10-32
|
ABC536 Combo Light Switch Knob
|
ABC541 Combo Light Switch Assembly with Knob 3 screw terminals
|
ACS139 Light Switch 3 Position Hi charge with lights Note: Switch manufacturers consider OFF as 1 position 0.800" diameter thread end, 10-32 thread Three screw type terminals
|
IHS599 12 Volt Rotary Light Switch 4 Position 0.670" O.D. thread
|
MFS179 Neutral Safety Switch Boot
|
ABC389 Fuse Holder Fuse not included Rated at 20 amp Fits in 1/2" hole - USA Made
| |